Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC400C10NWK
The AirTAC B52-GFC Copper-Free Air Source Treatment Component B52-GFC400C10NWK is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC400C10NWK
GFC400C10NWK is an AirTAC G-series two-unit air preparation set: a filter-regulator and a lubricator built together as one F+R+L package. It removes water and particulate from compressed air, regulates downstream pressure across a 0.15-0.9 MPa (20-130 psi) adjustment range, and meters oil mist to downstream actuators. This code is ported PT 3/8 in., carries the optional 5 um (W) element, uses the default differential-pressure drain, and a built-in check (reverse-flow) valve is fitted (trailing K) to block backflow. No pressure gauge is included (trailing N).
This is a genuine AirTAC part. The GFC family spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in., automatic or manual drain options, and G (BSPP) or NPT threads as catalogue choices; PT threading is the standard for this code. At size 400, the filter-regulator bowl and the lubricator oil bowl are both polycarbonate. Maximum working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm datasheet figures for your application before ordering.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC400C10NWK Technical Specifications
| Model | Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC400C10NWK |
|---|---|
| Series | GFC400 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC400C10NWK
| GFC400 | G-series two-unit set, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR400-C1 filter regulator and GL400-C1 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC400 · See datasheet · 40 µm |
|---|---|
| One size down | GFC300 |
| One size up | GFC600 |
| Three-unit equivalent | GC400-C1 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC400C10NWK Is Used
Transfer-line clamping
Supplying clamps and locators on a machining transfer line, with 5 um filtration for fine valve spools and a check valve holding the circuit while the header dips.
Torque spindle air supply
Feeding pneumatic torque spindles on an assembly station; the lubricator meters oil to the air motors and the check valve isolates the circuit from upstream pressure loss.
Trailer assembly tool ring
Serving air tools along a trailer assembly line with regulated, lubricated supply that resists backflow when neighboring branches draw down the main.
Is the Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC400C10NWK the Right Set?
This variant combines the 5 um W element for finer filtration with the K check valve against reverse flow - choose it where clean air and circuit isolation both matter. Port 10 gives a PT 3/8 in. connection, with the 400 size as the step up from GFC300 for larger port and flow path. The differential-pressure drain is the default; automatic (A) and manual (M) drains can be ordered, and the regulator range becomes 0.05-0.9 MPa with a manual drain. As an N-coded set it has no gauge; the series can instead be had with an embedded square or external round gauge in MPa, psi or bar scales. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against the datasheet before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR400-C1 filter regulator on its own.
Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC400C10NWK FAQ
AirTAC publishes flow for this series as performance curves, not as a single rated figure, so we do not state a number the datasheet does not give. Send your pressure and flow conditions and we will confirm the datasheet curves and sizing on request.
Without a trailing G or T, the set is threaded PT, the standard for this series. G (BSPP) and NPT versions are catalogue options you can order - tell us which thread your piping uses and we will quote the matching code.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac B52-GFC Copper-Free Air Source Treatment Component B52-GFC400C10NWK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.