Airtac B52-SC Copper-Free Standard Cylinder B52-SC40X700SFA
The AirTAC B52-SC Copper-Free Standard Cylinder B52-SC40X700SFA is a genuine double-acting standard air cylinder with a Ø40mm bore and 700mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke700 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-SC Copper-Free Standard Cylinder B52-SC40X700SFA
This B52-SC40X700SFA is the copper-free (copper-prohibited) version of AirTAC's SC40X700SFA tie-rod cylinder. The B52- prefix designates a build where copper and copper alloys are not permitted, making it suitable for lines like ammonia systems and some battery, electronics, and chemical plants. The exact material substitutions should be confirmed with us.
As an SC40X700SFA, it delivers 628 N of push force and 528 N of pull force at 0.5 MPa, with a maximum push of 1130 N at 0.9 MPa. It features a 16 mm diameter rod, a 21 mm adjustable cushion, and a body length of 142 mm, giving an approximate total extended length of 842 mm. The built-in magnet allows CMSG, DMSG, or EMSG sensors to be clamped onto the barrel for position sensing.
Airtac B52-SC Copper-Free Standard Cylinder B52-SC40X700SFA Technical Specifications
| Model | Airtac B52-SC Copper-Free Standard Cylinder B52-SC40X700SFA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B52-SC Copper-Free Standard Cylinder B52-SC40X700SFA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B52-SC Copper-Free Standard Cylinder B52-SC40X700SFA Is Used
Copper-Free Assembly Press
Use in a battery or electronics assembly press where copper contamination is prohibited. The 628 N push force at 0.5 MPa is suitable for light pressing and insertion tasks.
Lifting Gate in Chemical Plant
Ideal for lifting a small access gate or shield in a chemical processing line. The 700 mm stroke provides ample travel, and the copper-free build meets material restrictions.
Long-Stroke Conveyor Stop
Deploy as a pneumatic stop on a long conveyor section. The 700 mm stroke allows for a wide stop range, and the front flange mount secures it to the frame.
Is the Airtac B52-SC Copper-Free Standard Cylinder B52-SC40X700SFA the Right Cylinder?
For applications needing more force, consider stepping up to the 50 mm bore SC50X700, which provides 982 N of push force at 0.5 MPa. If your load is lighter, the 32 mm bore SC32X700 offers 402 N at 0.5 MPa. This model includes a front rectangular flange (FA) mount, specified by part code F-SC40FA, for panel or end mounting.
With a 700 mm stroke, be mindful of side-load and rod-bearing bending. An unsupported rod this long can bend under side load; use an external guide or consider a guided cylinder to manage this. When replacing a cylinder, match the bore, stroke, port thread (PT), mounting accessory, and magnet option exactly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B52-SC Copper-Free Standard Cylinder B52-SC40X700SFA FAQ
At 0.5 MPa, it provides 628 N of push force and 528 N of pull force. The maximum push force is 1130 N at 0.9 MPa operating pressure.
The B52- prefix indicates the copper-free (copper-prohibited) version of the SC40X700SFA. It shares the same dimensions and performance. For replacement, match the bore, stroke, port thread, mounting, and magnet. Please confirm the specific material substitutions with us for your application.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B52-SC Copper-Free Standard Cylinder B52-SC40X700SFA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.