The AirTAC BFC filter cup BFC2000 is a genuine A/B-line two-unit F.R.L. set with PT1/4" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob and oil-mist lubrication with a transparent sight dome. Flow is confirmed from the datasheet on request.
The BFC2000 is a two-unit air-treatment set from AirTAC's compact B line: a BFR-series filter-regulator plus a BL-series lubricator delivered as one package for compressed air only. This 1/4 in PT configuration carries the standard 40 um filter element with a differential-pressure drain plus manual drain on the bowl, a standard-type regulator with a push-to-lock self-locking knob and a gauge included (regulation range 0.15-0.9 MPa / 20-130 psi), and a lubricator with a transparent sight dome so you can watch and set the oil drip rate. Both stages use PC bowls.
This is a genuine AirTAC part in the compact A/B line, which is offered in 1/8, 1/4, 3/8 and 1/2 in sizes across the family. Flow is not published as a single rated figure, so ask us to confirm sizing and the current datasheet for your application before ordering.
| Model | Airtac BFC filter cup BFC2000 |
|---|---|
| Type | Two-Unit (Filter-Regulator + Lubricator) |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/4" (PT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Lubrication | Oil-mist, transparent sight dome |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Pick the B-line 2000 body (1/4 in PT) when your installed piping and required air delivery point to the larger compact body; the A line covers the same 1/8 to 1/2 in size span on the smaller body. Because flow is not a single published rating, ask us to confirm sizing against your demand before ordering. Drain choice: this model has the default differential-pressure plus manual drain, or order the A suffix for automatic draining. Filter element: 40 um standard or 5 um with the W suffix. Regulator type: standard 0.15-0.9 MPa as decoded here, or the low-pressure L type limited to 0.4 MPa. Gauges ship with MPa, psi, bar or kgf/cm2 scale options; thread is PT as standard, with G (BSPP) or NPT available to order.
Mounted at the drop to a spray booth, the set strips water and particulate from the shop air line, holds a steady set pressure for the spray gun, and meters a light oil mist to keep gun and valve seals lubricated through a full shift.
Installed ahead of a machining center's pneumatic panel, it cleans the compressed air feeding tool changers and clamps, keeps supply pressure stable with the self-locking knob, and lubricates downstream actuators.
On a bottling or packaging conveyor, the two-unit set conditions the air feeding cylinder-driven diverters and pushers, protecting them from water and grit while the sight dome lets an operator verify the drip rate at a glance.
Flow for the compact B-line two-unit set is not published as a single rated figure, so we do not quote a number here. Send us your line pressure and air demand and we will confirm the correct size and the flow data from the AirTAC datasheet on request.
Yes. The standard configuration, like this BFC2000, has a differential-pressure plus manual drain and a 40 um element; ordering with the A suffix gives automatic draining and the W suffix gives the 5 um element. Tell us which combination you need and we will quote it.