The AirTAC BFR Air Filter Regulator BFR20004W is a genuine A/B-line filter regulator with PT1/4" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The BFR20004W combines water and particulate filtration with pressure regulation in a single compact B-line body. The 5 um W-grade element handles finer particulate than the standard 40 um grade, the differential-pressure drain discharges accumulated condensate automatically during operation with a manual drain also fitted, and the included gauge reads in kgf/cm2 and psi so you can set and monitor downstream pressure at a glance. Media is compressed air, with a maximum working pressure of 1.0 MPa (145 psi) and a regulation range of 0.15-0.9 MPa (20-130 psi). The self-locking push-to-lock adjustment knob holds the set pressure against vibration.
This is a genuine AirTAC part from the compact A/B line, sized at 2000 (1/4 in) with a PT thread as standard. It is one of four port sizes in the B line (1/8, 1/4, 3/8 and 1/2 in). We do not publish flow as a single rated figure; ask us and we will confirm flow and datasheet figures for this model on request.
| Model | Airtac BFR Air Filter Regulator BFR20004W |
|---|---|
| Type | Filter Regulator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/4" (PT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Choose B-line 2000 (1/4 in PT) when your line flow and piping fall in that band; the compact A line covers smaller ports and B extends to 3/8 and 1/2 in. This unit carries the 5 um W element - pick it when downstream equipment needs finer filtration than the standard 40 um grade; keep the standard grade if coarse protection is enough. Drain is the default differential-pressure type with manual drain; if you need fully automatic condensate removal, the A-suffix variant is available. Thread is PT standard, with G (BSPP) as an order option.
Flow is not a single published rating for this family, so send us your line conditions and we will confirm the datasheet sizing before you order.
Mounted at the drop to a machining centre's pneumatic circuit, the 5 um element protects solenoid valves and air bearings from fine particulate while the regulator holds a stable set pressure for clamping and tool-change actuators.
Placed ahead of spray guns on a finishing line, the fine 5 um grade helps keep contaminates out of the air stream and the gauge-backed regulator lets the operator lock in the gun supply pressure with the self-locking knob.
On a laboratory bench supplying pneumatic test fixtures, the kgf/cm2 & psi dual-scale gauge and self-locking adjustment give repeatable set pressures for test cycles, with the differential-pressure drain keeping condensate off the instruments.
Flow for this family is not published as a single rated number, so we do not state one here. AirTAC datasheets give pressure-drop and flow characteristics for the 2000 size; contact us with your line pressure and demand and we will confirm the datasheet figures for the BFR20004W on request.
W selects the 5 um filter element instead of the standard 40 um element. Choose W when the downstream equipment is sensitive to fine particulate, such as precision valves, sensors or spraying equipment; for general workshop air, the standard 40 um grade is usually sufficient.