The AirTAC BFR Air Filter Regulator BFR2000N is a genuine A/B-line filter regulator with PT1/4" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The BFR2000N combines an air filter and a pressure regulator in one compact B-line body for 1/4 inch (PT) compressed-air lines. It separates water and 40 um particles into a polycarbonate bowl fitted with a differential-pressure drain plus a manual override, then holds downstream pressure anywhere in the 0.15-0.9 MPa (20-130 psi) setting range. The self-locking push-to-lock adjustment knob keeps the set pressure from drifting, and the N suffix means this unit is supplied without a pressure gauge, so add one separately if you want a visible setpoint.
This is a genuine AirTAC compact A/B-line part for compressed air only, rated at up to 1.0 MPa (145 psi) and -5 to 70 C (non-freezing). The compact B-line filter-regulator is also available in 1/8, 3/8 and 1/2 inch sizes (1500C, 3000C, 4000C). Flow figures are not published as a single rating, so ask us to confirm sizing and the full datasheet on request.
| Model | Airtac BFR Air Filter Regulator BFR2000N |
|---|---|
| Type | Filter Regulator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/4" (PT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Choose the B-line BFR2000N when your circuit runs 1/4 inch porting and you want the larger compact body; the A-line AFR1500C/2000C covers 1/8 and 1/4 inch in a smaller footprint. Drain options are differential-pressure with manual override (this model), fully automatic (A suffix) or manual-only (M), and the filter grade is 40 um standard or 5 um (W) for finer air. The standard type regulates 0.15-0.9 MPa; a low-pressure L type capped at 0.4 MPa is also offered. G (BSPP) and NPT threads are order options beside the PT standard, and decide whether a gauge is included since N omits it. Flow is not a single published rating, so send us your demand and we will confirm sizing against the datasheet before you order.
A small shop press driven by 1/4 inch air cylinders needs clean, dry air held at one repeatable clamping pressure. This unit filters water and particles on the way in and holds the regulator setting through repeated cycles.
Sealing-bar cylinders on a bagging machine give poor seals when supply pressure wanders. The BFR2000N conditions the line and keeps jaw pressure locked at the value the operator sets, without a gauge cluttering a tight panel.
Air-blast nozzles and spindle-seal air on a machining centre run best from filtered air at a stable set pressure. Mount this unit at the machine drop and drain the bowl manually as part of weekly checks.
AirTAC does not publish the compact A/B-line units with a single rated flow figure, because flow depends on inlet pressure and set pressure. We will pull the flow curve from the datasheet and confirm it against your demand on request before you order.
Correct. The N suffix means the pressure gauge is not included with this BFR2000N. A trailing digit instead of N would set the gauge scale: 1 = MPa, 2 = psi, 3 = bar, 4 = kgf/cm2 and psi.