The AirTAC BFR Air Filter Regulator BFR3000M2WT is a genuine A/B-line filter regulator with PT3/8" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The AirTAC BFR3000M2WT is a compact B-line filter regulator: one body that removes water and particulate from compressed air and then steps the downstream pressure to your setpoint. This configuration is the larger B-line body in the 3/8 in port size with NPT threads, a 5 um fine filtration element (the W grade, finer than the 40 um standard), a manual drain on the PC bowl, the standard pressure type, and a pressure gauge with a psi scale included. Regulation range is 0.15 to 0.9 MPa (20 to 130 psi), max working pressure is 1.0 MPa (145 psi), and the push-to-lock knob holds your setting against vibration.
This is a genuine AirTAC part from the compact A/B line, not the larger G/GA series. The same function is available in the smaller A-line (AFR) and in other port sizes: 1/8 in, 1/4 in, 3/8 in and 1/2 in, with PT as the standard thread and G (BSPP) or NPT to order. Published flow is not a single rated figure, so ask us to confirm the datasheet flow figures for your sizing before ordering.
| Model | Airtac BFR Air Filter Regulator BFR3000M2WT |
|---|---|
| Type | Filter Regulator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT3/8" (NPT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Choose the B-line BFR body when your line runs at higher flow and you want the larger bowl with its protective cover; step down to the A-line AFR or a smaller port size for compact drops and lighter duty. If oil mist downstream would harm your equipment, keep the 5 um element this code carries; the 40 um standard element suits general workshop air. The manual drain here suits attended installations where an operator can bleed the bowl; pick the A suffix for an automatic drain in unattended duty. The gauge ships with a psi scale, and NPT threads match US piping. Because flow is not published as a single rating, send us your flow and pressure requirement and we will confirm sizing from the datasheet before you order.
Placed ahead of the machine's air manifold, this 3/8 in filter regulator with a 5 um element delivers clean, dry air at a locked setpoint to spindle clamp, tool-change and pallet-clamp circuits on a machining center.
Mounted at the drop feeding a carton-sealing or case-packing conveyor, it conditions the plant air, holds a steady pressure to the divert and seal cylinders, and the psi gauge lets line staff verify the setpoint at a glance.
Installed on the atomizing-air drop to a manual spray gun station, the 5 um element protects finish quality from water and particles while the regulator pins the gun supply pressure for consistent film build.
AirTAC does not publish flow for this compact B-line filter regulator as a single rated number, so we do not quote one here. Send us your required flow and working pressure and we will confirm the datasheet flow figures for the BFR3000 size so you can size it correctly before ordering.
The W in the code is the fine filtration grade: a 5 um element instead of the 40 um standard, for air that feeds sensitive equipment. The M is a manual drain, so the PC bowl is bled by hand rather than automatically. If the unit will run unattended, ask us for the A-suffix automatic-drain version.