The AirTAC BFR filter cup BFR2000 is a genuine A/B-line filter regulator with PT1/4" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The BFR2000 is a compact B-line filter regulator from AirTAC: one body that removes water and particulate from compressed air and regulates downstream pressure. This configuration has a 1/4 in PT port, a 40 um standard filter element, and a differential-pressure drain with a manual override. A pressure gauge is included, and the push-to-lock self-locking adjustment knob holds the set pressure against vibration. Maximum inlet pressure is 1.0 MPa (145 psi), the regulation range is 0.15-0.9 MPa (20-130 psi), the polycarbonate bowl suits the condensate it collects, and the operating temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the compact A/B line. In the BFR family the same function is available in four sizes: 1500 (1/8 in), 2000 (1/4 in), 3000 (3/8 in) and 4000 (1/2 in), with G and NPT thread options to order. Flow and datasheet figures are not published as a single rating here, so ask us and we will confirm them from the AirTAC datasheet for your duty.
| Model | Airtac BFR filter cup BFR2000 |
|---|---|
| Type | Filter Regulator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/4" (PT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Choose the B-line BFR when your line needs the larger compact body; the A-line AFR covers the same function in the smaller size. Sizing is really a flow question, and flow is not a single rated figure, so tell us your air demand and we will confirm the right size from the datasheet before you order. Decodable options: the A suffix gives an automatic drain instead of the standard differential-pressure plus manual drain; the W suffix gives a 5 um element instead of the standard 40 um; gauge scale digits offer MPa, psi, bar or kgf/cm2 and psi readouts; and the thread can be ordered as G (BSPP) or NPT instead of the standard PT. The low-pressure L type (up to 0.4 MPa) also exists in this family if your circuit never needs more.
Clean, regulated air for carton sealers and wrapping machines, with the included gauge letting operators check set pressure at a glance.
Holds a steady clamp pressure on workholding fixtures, with the self-locking knob keeping the setting where the operator left it.
A point-of-use filter regulator feeding impact wrenches and riveters at a workshop drop, draining collected water before it reaches the tools.
Flow is not published as a single rated figure for this compact line, so we do not quote a number here. Send us your air demand and we will confirm the sizing and the flow figures directly from the AirTAC datasheet on request.
This standard BFR2000 has a differential-pressure drain with a manual override: condensate is discharged when the pressure differential rises, and you can also drain it by hand. If you want condensate removed without attention, order the BFR2000-A, which carries an automatic drain.