The AirTAC BFR filter cup BFR2000-005 is a genuine A/B-line filter regulator with PT1/4" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
BFR2000-005 is a spare-part code, not a complete unit. The trailing -005 marks a replacement component - a bowl, cup or fitting - for the AirTAC BFR2000 compact filter-regulator in the B line, the 1/4 in PT body. It exists so you can service an installed BFR2000 instead of replacing the whole unit, and it should not be ordered expecting a working filter-regulator on its own.
This is a genuine AirTAC part for the compact A/B line. Match it to your installed BFR2000 configuration, and ask us to confirm exactly what the -005 part contains, along with the current datasheet, on request before ordering.
| Model | Airtac BFR filter cup BFR2000-005 |
|---|---|
| Type | Filter Regulator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/4" (PT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Order this spare part only if you already run a BFR2000 compact filter-regulator in 1/4 in PT and need to renew its bowl, cup or fitting. If you need the complete filter-regulator, order the BFR2000 unit code instead. Note the decoded defaults of the parent unit: standard type, 40 um element, differential-pressure plus manual drain; alternative drain and filter options belong to complete-unit codes. As with every model in the family, flow is not published as a single rating - we confirm sizing and datasheet figures on request.
A shop running a plasma cutting table keeps this part on the shelf so a cracked or clouded bowl on the machine's BFR2000 filter-regulator can be renewed without taking the whole unit off the 1/4 in air line.
In an abrasive blasting shop where moisture and fines work the bowl hard, maintenance staff fit this replacement part during scheduled service of the BFR2000 ahead of the pot, keeping the regulator and filter stage in service.
A truck or bus fleet workshop that standardized on BFR2000 units at its air-tool drops stocks this genuine AirTAC part so a damaged bowl or fitting is swapped in minutes between vehicle jobs.
Flow for the compact B-line filter-regulator is not published as a single rated figure, so no number is quoted here for the part or the parent unit. Ask us to confirm the flow and datasheet figures for your application on request before you order.
No. The -005 suffix marks a spare part - a bowl, cup or fitting - for the BFR2000 compact filter-regulator, not the full unit. If you need a working filter-regulator with its knob, gauge and regulation function, order the complete BFR2000 code.