The AirTAC BFR filter cup BFR2000-P12 is a genuine A/B-line filter regulator with PT1/4" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
BFR2000-P12 is a replacement spare part for the AirTAC BFR2000 filter regulator, the larger B-line body in AirTAC's compact A/B series. It corresponds to the BFR2000's 1/4 in. PT-threaded port configuration, so it is meant to service an existing BFR2000 unit rather than to add filtration or regulation functions to your air line. Treat it as the replacement component it is - a bowl, cup or fitting for that unit.
This is a genuine AirTAC part in the compact A/B line. The complete BFR2000 it serves combines water and particulate filtration (40 um standard element) with pressure regulation in one body, has a PC bowl with differential-pressure and manual drain, and includes a gauge. Spare-part fitment and datasheet figures are confirmed on request - contact us with your unit's full code.
| Model | Airtac BFR filter cup BFR2000-P12 |
|---|---|
| Type | Filter Regulator |
| Line | B-line (compact A/B air preparation) |
| Port size | PT1/4" (PT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Match the part to the code on the label of the unit you are servicing. Confirm your existing unit is a BFR2000 with a PT-threaded 1/4 in. port; G (BSPP) and NPT versions and the smaller A-line AFR2000 take different spare parts. The -P12 suffix marks this as a spare part, not a complete filter regulator.
Flow is not published as a single rating for the BFR family, so if you are specifying a new installation rather than servicing an existing one, ask us and we will confirm the datasheet figures for the complete unit before you order.
Keep a spare on hand for the BFR2000 that filters and regulates air to paint spray equipment, so a damaged bowl does not take a booth out of service.
Service the filter regulator feeding gripper and tool-change circuits on a robotic welding cell without waiting for a full replacement unit.
Maintain the point-of-use filter regulator on truck air-tool stations in a commercial vehicle workshop, restoring clean, regulated air quickly.
Flow is not published as a single rating, and no flow figure applies to a spare part - it depends on the complete BFR2000 unit and your conditions. Ask us and we will confirm the datasheet flow data for the complete unit on request.
Check the code on your unit's label. BFR2000-P12 is the spare part for the B-line BFR2000 filter regulator in the 1/4 in. size with PT thread as standard. Units with G (BSPP) or NPT threads, or the smaller A-line AFR2000, use different parts. Send us your full code and we will confirm fitment.