verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ESV400-BASE · ISO Valve Base

Airtac ESV-M Base ESV402M

Genuine AirTAC iso valve base, order code ESV402M from the ESV400-BASE range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • PartManifold base (2M)
  • Ports and pilotLeft ports · independent pilot
  • Port threadPT
  • PartsSingle base (1M), Manifold base (2M), End plate set (3M)
  • Working portsPT1/2
  • End-plate portsPT3/4
$39.51 $47.01Save 15%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ESV400-BASE part, ports and pilot and port thread on one page All ESV400-BASE codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ESV-M Base ESV402M

One station of a bolt-together ISO 5599-1 manifold: each 2M base carries a single ESV4x0 solenoid or EAV4x0 air-piloted 400-series valve and exposes the PT1/2 working ports on its left face.

Port and pilot settings are the defaults for a manifold base: working ports on the left and an independent external pilot port, so each station is fed separately and no W option is fitted. Close the assembled bank with an ESV403M end plate set, whose supply and exhaust ports step up one size to PT3/4. Every base contains an exhaust throttle; a hex key turned clockwise reduces exhaust flow.

Airtac ESV-M Base ESV402M Technical Specifications

Order codeESV402M
ProductISO Valve Base
PartManifold base (2M)
Ports and pilotLeft ports · independent pilot
Port threadPT
PartsSingle base (1M), Manifold base (2M), End plate set (3M)
Working portsPT1/2
End-plate portsPT3/4
Mounting faceISO 5599-1
FluidAir (filtered by 40 µm element)
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
Exhaust throttleBuilt in

Source: AirTAC Products Catalog 2026A (PDF01-P0094..P0096), ESV200/300/400/600 series specifications and ordering code.

How to choose

Within the manifold family, ESV402M keeps the default left-side PT working ports and the independent pilot. Choose ESV402MR when ports must face right, ESV402MB for bottom exits, or specify the W option to centralize the pilot supply through the end plate. For a lone valve, the ESV401M single base is the simpler choice, and the G suffix converts the thread standard where needed.

Applications

view_module

Multi-station bank build

Bolt as many 2M bases as the machine needs, one valve per station, and cap the assembly with an ESV403M end plate set on PT3/4 supply and exhaust.

valve

Left-piped machine frame

Route PT1/2 tubing along the left side of a frame where right-side access is blocked; the independent pilot port lets every station switch on its own signal.

tune

Per-station exhaust trim

Adjust each valve's exhaust with the built-in throttle screw instead of installing inline speed controllers across a multi-valve bank.

FAQ

What are the key figures of the ESV402M?

PT1/2 left-side working ports on PT thread, independent external pilot port, ISO 5599-1 mounting face, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, exhaust throttle built into each base; add one ESV403M end plate set (PT3/4 supply and exhaust) per manifold.

How does air reach an ESV402M station?

Supply and exhaust enter through the end plate set (ESV403M), whose ports are one size larger at PT3/4, while each valve's PT1/2 working ports exit on the left and its external pilot is fed independently at that station.