verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ESV400-BASE · ISO Valve Base

Airtac ESV-M Base ESV402MGWB

Genuine AirTAC iso valve base, order code ESV402MGWB from the ESV400-BASE range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • PartManifold base (2M)
  • Ports and pilotBottom ports (B) · centralized pilot (W)
  • Port threadG (BSPP)
  • PartsSingle base (1M), Manifold base (2M), End plate set (3M)
  • Working portsPT1/2
  • End-plate portsPT3/4
$39.51 $47.01Save 15%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ESV400-BASE part, ports and pilot and port thread on one page All ESV400-BASE codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ESV-M Base ESV402MGWB

ESV402MGWB specifies the 2M manifold base of the AirTAC ESV400 series with bottom working ports, a centralized external pilot and G (BSPP) thread. It seats one ISO 5599-1 valve, either an ESV4x0 solenoid valve or an EAV4x0 air-piloted valve, and delivers the PT1/2-size working ports from below. Several 2M bases bolt together into a manifold of any number of stations, sealed at the end by a 3M end plate set whose supply and exhaust ports are one size larger, PT3/4.

The W in the code means the external pilot supply enters once at the end plate and feeds every station on the manifold, instead of each base taking its own pilot connection. Air must be filtered by a 40 um element, and the base withstands a 1.5 MPa (215 psi) proof pressure between -20 and +70 C. Each station carries a built-in exhaust throttle: turn the adjusting screw clockwise with a hex key to reduce exhaust flow, so no separate speed controller is needed. Plug any bottom port left unused.

Airtac ESV-M Base ESV402MGWB Technical Specifications

Order codeESV402MGWB
ProductISO Valve Base
PartManifold base (2M)
Ports and pilotBottom ports (B) · centralized pilot (W)
Port threadG (BSPP)
PartsSingle base (1M), Manifold base (2M), End plate set (3M)
Working portsPT1/2
End-plate portsPT3/4
Mounting faceISO 5599-1
FluidAir (filtered by 40 µm element)
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
Exhaust throttleBuilt in

Source: AirTAC Products Catalog 2026A (PDF01-P0094..P0096), ESV200/300/400/600 series specifications and ordering code.

How to choose

Pick this code over ESV402MGWR when the valve island is pipe-dropped from below, since R points the same G ports to the right instead. Choose it over ESV402MR, which shares the right-port layout but uses standard PT thread and an independent pilot port per station, when you prefer BSPP fittings and a single pilot feed for the whole manifold.

Applications

factory

Central-pilot valve islands

Externally piloted EAV4x0 valves on a machine manifold take their pilot supply from one line at the end plate, so the whole island runs on a single pilot feed instead of one connection per station.

packaging

Piping dropped under packaging machines

Bottom G ports let supply and cylinder hoses leave the manifold downward, keeping the ISO 5599-1 mounting face and side clearance free for valve replacement.

tune

Exhaust speed trimming per station

The built-in exhaust throttle is set station by station with a hex key, clockwise to slow cylinder return, without adding separate speed controllers to the PT1/2-size circuit.

FAQ

What are the key figures of the ESV402MGWB?

Manifold base (2M) for one ISO 5599-1 valve; bottom working ports in G (BSPP) thread at PT1/2 size; centralized external pilot (W); proof pressure 1.5 MPa (215 psi); temperature -20 to +70 C; air filtered by a 40 um element; 3M end plate set ports PT3/4; built-in exhaust throttle on every station.

How does the centralized W pilot differ from an independent pilot port?

With W, one external pilot supply is connected once at the manifold end plate and distributed to all stations, which simplifies piping on multi-valve islands. With an independent pilot port, each base is fed separately. The distinction only matters for externally piloted EAV4x0 valves; ESV4x0 solenoid valves do not draw on the pilot port.