verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ESV400-BASE · ISO Valve Base

Airtac ESV-M Base ESV402MW

Genuine AirTAC iso valve base, order code ESV402MW from the ESV400-BASE range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • PartManifold base (2M)
  • Ports and pilotLeft ports · centralized pilot (W)
  • Port threadPT
  • PartsSingle base (1M), Manifold base (2M), End plate set (3M)
  • Working portsPT1/2
  • End-plate portsPT3/4
$39.51 $47.01Save 15%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ESV400-BASE part, ports and pilot and port thread on one page All ESV400-BASE codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ESV-M Base ESV402MW

The ESV402MW is the left-port variant of the AirTAC ESV400 manifold base: on every station the PT1/2 working ports face to the left of the manifold, so tube and hose runs exit from one consistent side along the whole valve bank. Each 2M base carries one valve with an ISO 5599-1 mounting face, either an ESV4x0 solenoid valve or an EAV4x0 air-piloted valve, and bases bolt together into a bank of any number of stations that is closed off by a 3M end plate set whose supply and exhaust ports are one size larger, PT3/4.

The W in the order code switches the external pilot supply from per-station ports to a centralized feed: pilot air for externally piloted valves arrives through the end plate, so only the manifold ends need hookup instead of every station. Each base also carries a built-in exhaust throttle, turned with a hex key (clockwise reduces exhaust flow), so separate speed controllers are not needed. The base runs on air filtered by a 40 um element, handles a proof pressure of 1.5 MPa (215 psi) and works from -20 to +70 C.

Airtac ESV-M Base ESV402MW Technical Specifications

Order codeESV402MW
ProductISO Valve Base
PartManifold base (2M)
Ports and pilotLeft ports · centralized pilot (W)
Port threadPT
PartsSingle base (1M), Manifold base (2M), End plate set (3M)
Working portsPT1/2
End-plate portsPT3/4
Mounting faceISO 5599-1
FluidAir (filtered by 40 µm element)
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
Exhaust throttleBuilt in

Source: AirTAC Products Catalog 2026A (PDF01-P0094..P0096), ESV200/300/400/600 series specifications and ordering code.

How to choose

Choose ESV402MW when your layout favors left-facing PT1/2 ports; pick ESV402MWB if piping must drop out of the bottom of each station, or ESV402MWR when the tube runs should leave from the right-hand side of the bank. The W centralized pilot suits externally piloted valves fed from one point; drop the W if each station needs its own independent pilot port.

Compared with the single base ESV401M, this 2M base exists only as part of a multi-station manifold: order one ESV402MW per valve plus one ESV403M end plate set. PT thread is standard here; add G in the order code if the installation needs G thread ports.

Applications

conveyor_belt

Conveyor gate island

A row of ESV402MW stations along a conveyor line keeps all PT1/2 cylinder and valve port runs on the left side, matching gates and diverters mounted in one direction.

packaging

Packaging machine valve bank

Centralized W pilot feed through the end plate means a packaging line manifold of ESV4x0 valves needs pilot supply only at the ESV403M end plate, not at each station.

view_module

Modular pneumatic panel

Start with one ESV402MW and one ESV403M end plate set, then bolt on more 2M bases as the machine grows; the built-in exhaust throttle tunes cylinder speed without extra fittings.

FAQ

What are the key figures of the ESV402MW?

Manifold base (2M) for one ISO 5599-1 face valve (ESV4x0 solenoid or EAV4x0 air-piloted); PT1/2 working ports facing left; PT thread standard; centralized external pilot (W) fed through the end plate; built-in exhaust throttle adjusted by hex key; proof pressure 1.5 MPa (215 psi); temperature -20 to +70 C; air filtered by a 40 um element.

How do I build a complete left-port manifold around this base?

Order one ESV402MW per valve, bolt the bases together into a bank, and finish with one ESV403M end plate set, whose supply and exhaust ports are PT3/4. The centralized W pilot means the end plate also carries the pilot feed, so no pilot piping is needed at the individual stations.