The AirTAC GAF Air Filters GAF300-5 is a genuine compressed-air filter. Its diversion structure spins the air to separate liquid water and trap solid particles down to 40 µm, protecting downstream valves and tools. It has See datasheet ports and a 60 cc drain bowl. It is a filter only — it does not regulate or set pressure.
The AirTAC GAF300-5 is a compressed air filter and nothing more: no regulator, no gauge and no adjusting knob sit on this body. Inside, a diversion structure spins the incoming air so liquid water and solid particles are thrown out into the 60 cc drain bowl, while the 5 um HDPE element traps the fine grain that remains. It mounts in a 3/8in PT threaded line and comes with a transparent PC bowl plus a mounting bracket.
At 360 g this unit belongs to the mid size class, one step above the 200 g GAF200, so give it a proper panel or frame mount rather than letting the tubing carry it. The 5 um element is the fine option: it catches far smaller particles than the standard 40 um grade, which suits precision valves and instrument take-offs, though the element will need attention more often. The 60 cc bowl also holds roughly 2.4x the condensate of the 25 cc bowl on a GAF200, so draining stretches further apart.
| Model | Airtac GAF Air Filters GAF300-5 |
|---|---|
| Series | GAF300 air filter |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Bracket | Included |
| Fluid | Air |
|---|---|
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Element | HDPE filter core |
| Weight | 360 g |
Specifications follow the official AirTAC GAF catalogue (pages 225-226). Air must not freeze in the unit. This is a filter only — it separates water and solid particles but does not set or hold a downstream pressure. To regulate pressure as well, use the matching GAFR300 filter-regulator.
| GAF300 | GA300 series air filter — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 5 | Port size See datasheet. This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| (blank) | Mounting bracket included. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT port thread. |
A GAF has no regulator and no pressure gauge — there is no type, gauge or reflux code. Need to regulate pressure too? The matching GAFR300-5 is the same filter with a built-in regulator.
Figures are the end of the flow curve plotted in the AirTAC catalogue — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. A filter this size drops less pressure at flow than the same-body GAFR filter-regulator, so match it to your peak demand.
| This model | GAF300 · See datasheet · curve to 6000 L/min |
|---|---|
| One size down | GAF200 |
| One size up | GAF400 (curve to 8000 L/min) |
| Add regulation | GAFR300-5 (filter + regulator) |
Clean the 3/8in supply ahead of cartoner and case-packer control valves; the 5 um element keeps fine dust out of pilot seats while the 60 cc bowl collects condensed water on humid production days.
Feed machining-centre clamps and pneumatic jigs through this mid-size body; at 360 g it needs a panel or frame mount, never support from the tubing itself.
Drop a GAF300 into a branch off the workshop header to spin out pipe scale and water before the air reaches downstream cylinders and hand tools.
Start with the port: this model covers 3/8in, while the GAF300 body also accepts 1/4in and 1/2in; if your line breathes harder, step up to a GAF400 (3/8in-1/2in, curve plotted to 8000 L/min), or drop to the compact GAF200 for small jigs. The PC bowl here suits general plant air; for aggressive surroundings confirm material compatibility, or order the metal (C) or nylon (N) bowl variant instead. Drain type matters too: this unit carries both a semi-auto drain and a manual drain, so someone bleeds the bowl on a schedule; wet or unattended runs should pick the A version with a fully automatic drain. The mounting bracket is included, the 5 um W element is already fitted, and the PT port thread must match your fittings, with G and NPT variants available. Should the circuit also need a set pressure, add the matching GAFR with its built-in regulator, because a plain GAF never regulates. For sizing, the flow curve is plotted to 6000 L/min, which is 2x the 3000 L/min envelope of the smaller GAF200.
Quick checklist
This is a filter only — it removes water and solid particles but adds no pressure control and no lubrication. Add a GAR regulator, a GAL lubricator, or step up to the GAFR300-5 filter-regulator as your air-prep needs grow.
Filtering grade is 5 um (the fine W element). Working pressure spans 0.15-0.9 MPa (20-130 psi) and proof pressure is 1.5 MPa (215 psi), a burst-test figure rather than a working target. Operating temperature is -5 to 70 C and the unit must never freeze. The drain bowl holds 60 cc of condensate and the body weighs 360 g.
The blank drain code means both a semi-auto drain and a manual drain are fitted. Condensate partly ejects itself as flow pulses through the body, and the manual screw lets an operator bleed the 60 cc bowl during stops. For lines that run unattended, order the A variant with a fully automatic drain instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.