The AirTAC GAFR Filter & Regulators GAFR10006SG is a genuine compact two-in-one filter & regulator — a water/particulate filter and a balanced pressure regulator in ONE 80 g body. It has a 1/8" port, a 40 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
The GAFR10006SG pairs a diversion-structure air filter with a balanced, self-locking pressure regulator in a single 80 g body sized for a 1/8in port. Spinning air drops water and solid particles into the 6 cc condensate bowl, while the regulator holds a set outlet pressure anywhere from 0.15 to 0.9 MPa (20-130 psi) as supply pressure moves. A circular gauge reading in bar/MPa is fitted, and the 40 um element handles general-purpose particle control.
The pressed-in self-locking knob resists vibration drift, and the included mounting bracket lets you fix the unit beside the point of use. The G thread code sets the gauge scale to bar/MPa, so match this model to operators who read in bar. This one-body build replaces a separate filter plus regulator with fewer joints, and the plotted flow curve reaches about 400 L/min for the 1/8in port at 0.7 MPa inlet - a sizing envelope rather than a rated figure.
| Model | Airtac GAFR Filter & Regulators GAFR10006SG |
|---|---|
| Series | GAFR100 filter & regulator |
| Port size | 1/8" (G thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 6 cc |
| Bracket | Included |
| Weight | 80 g |
Specifications follow the official AirTAC GAFR catalogue (page 234). Air must not freeze in the unit. The fitted circular gauge reads in bar / MPa, set by the G thread code. This unit filters and regulates only; it does not add lubrication.
| GAFR100 | GA100 series filter & regulator — the compact single-body size. |
|---|---|
| (blank) | Bowl material: PC. The GAFR100 is offered with a PC bowl only. |
| 06 | Port size 1/8". This body offers M5 and 06 = 1/8". |
| (blank) | Drain: semi-auto drain plus manual drain. There is no automatic-drain option on the GAFR100. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). Standard (S) or lower-pressure (L) are both available. |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| G | G thread; gauge scale bar / MPa. |
| (blank) | Reflux (reverse-flow) valve is not available on the GAFR100. |
The filter and the regulator are ONE body here. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC10006 F.R.L. combination instead.
Figures are the end of the flow curve plotted in the AirTAC catalogue — a sizing envelope, not a rated flow. The GAFR100 is the smallest body; for higher demand step up to the GAFR200-600 range. Outlet pressure falls as flow rises, so size with headroom above your peak demand.
| This model | GAFR100 · 1/8" · curve to 400 L/min |
|---|---|
| One size up | GAFR200 (curve to 2000 L/min) |
| Add a lubricator | GAFC10006 (F.R.L. combination) |
Feeds a small hand screwdriver or riveter at a set pressure on a workbench line, with the bar/MPa gauge letting an operator read the setting at a glance.
Regulates one compact clamp cylinder to a repeatable holding force; the included bracket mounts the 80 g unit close to the actuator on the machine frame.
Filters and steps down air for a sensor, transducer or small pilot circuit on a branch off the main header, trapping water and solids in the 6 cc bowl.
Choose this exact code when you want the fully fitted 1/8in version: standard 0.15-0.9 MPa (20-130 psi) regulation, circular gauge on the G (bar/MPa) scale, 40 um element, semi-auto plus manual drain, and the mounting bracket included. Drop the J, N or W letters for the variants without bracket or gauge, or with the finer 5 um element. If your line may later need regulation above 0.9 MPa, confirm the type before ordering, since the S band tops out there. When downstream equipment needs oil mist, the matching GAFC combination on the same body and port is the upgrade path. For higher air demand, step up to the GAFR200 size class. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, order the GAFC10006 combination; do not expect an oil mist from this unit.
It is a 1/8in-port filter and regulator in one body with a working range of 0.15-0.9 MPa (20-130 psi), a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It runs from -5 to 70 C, has a 6 cc PC drain bowl with semi-auto and manual drain, weighs 80 g, carries a 40 um element and a circular gauge scaled in bar/MPa. The plotted flow curve reaches about 400 L/min at 0.7 MPa inlet.
The G at the end of GAFR10006SG is the thread code, and on this body that code also sets the gauge scale to bar/MPa. PT-threaded versions carry an MPa/psi gauge and NPT versions a psi/bar gauge, so pick the suffix that matches the scale your operators read.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.