Airtac GAR Air Regulator GAR30010SK
The AirTAC GAR Air Regulator GAR30010SK is a genuine compressed-air pressure regulator. It sets and holds a steady downstream pressure across the 0.05 - 0.9 MPa range, with 3/8" ports and a built-in circular pressure gauge. It regulates pressure only — it does not filter the air or remove water.
- TypeAir regulator
- Port size3/8"
- Pressure range0.05 - 0.9 MPa
- RegulationStandard
- GaugeCircular
- Reflux valveYes (K)
- Max pressure1.0 MPa
- Weight300 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAR Air Regulator GAR30010SK
The AirTAC GAR30010SK is a regulator-only unit that takes a variable supply and holds a steady downstream pressure you set with its self-locking knob. It does not filter or clean the air, and it has no drain bowl or filter element.
This 3/8in model weighs 300 g and covers the standard 0.05-0.9 MPa (7-130 psi) range. Its pressed-in self-locking mechanism keeps the setpoint from drifting when the machine vibrates, so a calibrated pressure stays put during a shift.
Airtac GAR Air Regulator GAR30010SK Technical Specifications
| Model | Airtac GAR Air Regulator GAR30010SK |
|---|---|
| Series | GAR300 air regulator |
| Port size | 3/8" (PT thread) |
| Regulation type | Standard |
| Pressure range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure gauge | Circular, MPa / psi scale |
| Bracket | Included |
| Reflux valve | Attached (K) |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -20 to +70 °C |
| Adjustment | Self-locking press-in knob |
| Mounting | Panel + optional bracket |
| Weight | 300 g |
Specifications follow the official AirTAC GAR catalogue (pages 228-229). This is a regulator only — it sets and holds a downstream pressure but does not filter the air or separate water. To clean the air as well, use the matching GAFR300 filter-regulator or add a GAF filter upstream. Never run above the 1.5 MPa (215 psi) proof pressure.
Model Code: Airtac GAR Air Regulator GAR30010SK
| GAR300 | GA300 series air regulator — sets the port range and weight class. |
|---|---|
| 10 | Port size 3/8". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| S | Standard regulation: 0.05 - 0.9 MPa (7 - 130 psi). This body offers S (standard) or L (lower pressure). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached (K). |
A GAR regulates pressure but does not filter — there is no bowl, element or drain code. Need to clean the air too? The matching GAFR300-10 is the same regulator with a built-in filter.
Size Class
- GAR2001/8"-1/4" · 170 g
- GAR3001/4"-1/2" · 300 g
- GAR4003/8"-1/2" · 570 g
- GAR5003/4" · 580 g
- GAR6003/4"-1" · 1390 g
All bodies share the same 0.05-0.9 MPa (S) regulated range, 1.0 MPa max and 1.5 MPa proof; the body number sets the port size and the flow the regulator can pass. Bigger ports feed higher air demand. The catalogue plots a flow curve at 0.7 MPa inlet but prints no numeric envelope, so size by port and weight and confirm the curve for a real duty point.
| This model | GAR300 · 3/8" · 300 g |
|---|---|
| One size down | GAR200 |
| One size up | GAR400 |
| Add filtration | GAFR300-10 (filter + regulator) |
Where the Airtac GAR Air Regulator GAR30010SK Is Used
CNC fixture clamping
Set a stable 0.6 MPa to hold a workpiece on a milling fixture, where supply swings from the compressor would otherwise vary the clamp force.
Pneumatic tool feed
Feed a 3/8in air screwdriver or die grinder at a regulated pressure so torque stays consistent across a production batch.
Lab test rig
Supply a test jig with a precise, adjustable pressure for repeatable actuator strokes, relying on the self-lock knob to hold the setting.
Is the Airtac GAR Air Regulator GAR30010SK the Right Regulator?
Choose the GAR300 body when your line needs a 3/8in port and moderate air volume; step up to the GAR400 (570 g) for a 1/2in port, or down to the GAR200 (170 g) for 1/4in. The S type regulates 0.05-0.9 MPa, while an L type would cap at 0.4 MPa and cannot reach a 0.5 MPa setpoint. This unit keeps its circular gauge (MPa/psi scale) and the mounting bracket, and it carries a reverse-flow (reflux) valve. If the air also needs cleaning, fit a GAFR300 or a GAF filter upstream, since this regulator does not filter. The S type's 0.85 MPa adjustable band is about 2.4x the L type's 0.35 MPa span.
Quick checklist
- ✓ Body size for your air demand (3/8" here)
- ✓ Type S (0.05-0.9) or L (0.05-0.4 MPa)
- ✓ Gauge fitted, or no gauge (N)
- ✓ Thread PT / G / NPT (sets gauge scale)
- ✓ Bracket kept or removed (J)
- ✓ Need filtration too? Use GAFR300
Installation & Setting Notes
- check Install with the airflow arrow: IN to OUT, knob accessible.
- check Put a filter (GAF or a GAFR) UPSTREAM — a regulator does not clean the air.
- check Set pressure by turning the knob up to the target, then press it in to lock.
- check Keep supply at or below the 1.0 MPa (145 psi) max working pressure.
- check Never exceed the 1.5 MPa (215 psi) proof pressure.
- check Support the 300 g unit on its panel or bracket, not on the tubing.
This is a regulator only — it sets and holds pressure but does not filter or lubricate. Add a GAF filter, a GAL lubricator, or step up to the GAFR300-10 filter-regulator as your air-prep needs grow.
Airtac GAR Air Regulator GAR30010SK FAQ
It regulates 0.05-0.9 MPa (7-130 psi), with a 1.0 MPa (145 psi) max supply and 1.5 MPa (215 psi) proof pressure. Operating temperature is -20 to 70 C, and the unit weighs 300 g with a 3/8in port.
The K indicates a reverse-flow (reflux) valve is attached to the regulator. This unit includes that valve; it does not change the pressure range or the fact that the GAR does not filter air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAR Air Regulator GAR30010SK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.