Airtac GAR Air Regulator GAR30015L
The AirTAC GAR Air Regulator GAR30015L is a genuine compressed-air pressure regulator. It sets and holds a steady downstream pressure across the 0.05 - 0.4 MPa range, with 1/2" ports and a built-in circular pressure gauge. It regulates pressure only — it does not filter the air or remove water.
- TypeAir regulator
- Port size1/2"
- Pressure range0.05 - 0.4 MPa
- RegulationLower pressure
- GaugeCircular
- Reflux valveNo
- Max pressure1.0 MPa
- Weight300 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAR Air Regulator GAR30015L
The GAR30015L is an air pressure regulator that takes a higher supply and holds a steady, lower downstream pressure you set with the knob and read on the circular gauge. It is a regulator only - it does not filter the air, remove water, or separate particles, and has no drain bowl or filter element. This unit has a 1/2in port and weighs 300 g, placing it in the mid-size GAR300 class.
The pressed-in self-locking knob stops the set pressure drifting from vibration or accidental knocks, so a machine keeps its setting through a shift. The balanced adjustment mechanism holds the setpoint as the supply pressure varies. The circular gauge with clip and magnifier saves panel space and is easy to read, with an MPa/psi scale matching the PT thread.
Airtac GAR Air Regulator GAR30015L Technical Specifications
| Model | Airtac GAR Air Regulator GAR30015L |
|---|---|
| Series | GAR300 air regulator |
| Port size | 1/2" (PT thread) |
| Regulation type | Lower pressure |
| Pressure range | 0.05 - 0.4 MPa (7 - 58 psi) |
| Pressure gauge | Circular, MPa / psi scale |
| Bracket | Included |
| Reflux valve | None |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -20 to +70 °C |
| Adjustment | Self-locking press-in knob |
| Mounting | Panel + optional bracket |
| Weight | 300 g |
Specifications follow the official AirTAC GAR catalogue (pages 228-229). This is a regulator only — it sets and holds a downstream pressure but does not filter the air or separate water. To clean the air as well, use the matching GAFR300 filter-regulator or add a GAF filter upstream. Never run above the 1.5 MPa (215 psi) proof pressure.
Model Code: Airtac GAR Air Regulator GAR30015L
| GAR300 | GA300 series air regulator — sets the port range and weight class. |
|---|---|
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| L | Lower pressure regulation: 0.05 - 0.4 MPa (7 - 58 psi). This body offers S (standard) or L (lower pressure). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow (reflux) valve. |
A GAR regulates pressure but does not filter — there is no bowl, element or drain code. Need to clean the air too? The matching GAFR300-15 is the same regulator with a built-in filter.
Size Class
- GAR2001/8"-1/4" · 170 g
- GAR3001/4"-1/2" · 300 g
- GAR4003/8"-1/2" · 570 g
- GAR5003/4" · 580 g
- GAR6003/4"-1" · 1390 g
All bodies share the same 0.05-0.9 MPa (S) regulated range, 1.0 MPa max and 1.5 MPa proof; the body number sets the port size and the flow the regulator can pass. Bigger ports feed higher air demand. The catalogue plots a flow curve at 0.7 MPa inlet but prints no numeric envelope, so size by port and weight and confirm the curve for a real duty point.
| This model | GAR300 · 1/2" · 300 g |
|---|---|
| One size down | GAR200 |
| One size up | GAR400 |
| Add filtration | GAFR300-15 (filter + regulator) |
Where the Airtac GAR Air Regulator GAR30015L Is Used
Low-pressure clamping
Set a gentle, repeatable clamp force on a delicate workpiece in a light assembly fixture, where the lower 0.05-0.4 MPa range gives finer control than a standard regulator.
Lab air supply
Feed a stable low-pressure air supply to a bench-top pneumatic experiment or a sensitive instrument, holding the setpoint against supply swings from the compressor.
Paint spray regulation
Regulate air to a spray gun at a consistent low pressure, avoiding over-spray and keeping the finish even when the shop air supply fluctuates.
Is the Airtac GAR Air Regulator GAR30015L the Right Regulator?
Choose the body and port to match the line size and air demand - the GAR300 with a 1/2in port sits between the smaller GAR200 (170 g, up to 1/4in) and the larger GAR400 (570 g, up to 1/2in). This is the L (lower) type, regulating 0.05-0.4 MPa (7-58 psi) with finer resolution over that low band; it cannot reach a 0.5-0.6 MPa setpoint, so pick the S type if you need standard pressures. The circular gauge is fitted and reads MPa/psi, matching the PT thread; the mounting bracket is included. If the line also needs clean air, use a GAFR filter-regulator or a GAF filter upstream - this unit does not clean the air. The L type's adjustable band is 0.35 MPa wide, about 2.4x narrower than the S type's 0.85 MPa span.
Quick checklist
- ✓ Body size for your air demand (1/2" here)
- ✓ Type S (0.05-0.9) or L (0.05-0.4 MPa)
- ✓ Gauge fitted, or no gauge (N)
- ✓ Thread PT / G / NPT (sets gauge scale)
- ✓ Bracket kept or removed (J)
- ✓ Need filtration too? Use GAFR300
Installation & Setting Notes
- check Install with the airflow arrow: IN to OUT, knob accessible.
- check Put a filter (GAF or a GAFR) UPSTREAM — a regulator does not clean the air.
- check Set pressure by turning the knob up to the target, then press it in to lock.
- check Keep supply at or below the 1.0 MPa (145 psi) max working pressure.
- check Never exceed the 1.5 MPa (215 psi) proof pressure.
- check Support the 300 g unit on its panel or bracket, not on the tubing.
This is a regulator only — it sets and holds pressure but does not filter or lubricate. Add a GAF filter, a GAL lubricator, or step up to the GAFR300-15 filter-regulator as your air-prep needs grow.
Airtac GAR Air Regulator GAR30015L FAQ
The GAR30015L is a lower-pressure regulator with a regulated range of 0.05-0.4 MPa (7-58 psi). Maximum supply pressure is 1.0 MPa (145 psi), proof pressure is 1.5 MPa (215 psi), and the temperature range is -20 to 70 C. The unit weighs 300 g and has a 1/2in port. It does not filter air or remove water.
The L type means lower-pressure regulation, spanning 0.05-0.4 MPa (7-58 psi) instead of the standard S type's 0.05-0.9 MPa (7-130 psi). It offers finer resolution over the low band, but it cannot reach a setpoint above 0.4 MPa, so it is the wrong part for a standard machine running at 0.5-0.6 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAR Air Regulator GAR30015L
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.