Airtac GC FRL Unit GC200C06C1
The AirTAC GC FRL Unit GC200C06C1 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC200C06C1
The AirTAC GC series is a three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator mounted as one set, so one conditioned-air connection handles filtration, regulation and oil-mist lubrication. This GC200C06C1 is the 200 size with 1/8 in PT ports, the standard 40 um filter element and a differential-pressure drain, and it carries a round external pressure gauge with an MPa scale so the regulator setting is readable at the unit. Maximum inlet pressure is 1.0 MPa (145 psi), and with the differential-pressure drain the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi). Operating temperature is -5 to 70 C (non-freezing).
This is a genuine AirTAC part from the G series, which runs from 200 through 600 sizes with ports from 1/8 in to 1 in. Gauge style and scale (embedded square or external round; MPa, psi or bar), drain type, filter grade, thread (PT standard; G and NPT are catalogue options) and bracket choices are all selectable. Flow is published as curves rather than a single rating, so we confirm datasheet and sizing figures for your application on request.
Airtac GC FRL Unit GC200C06C1 Technical Specifications
| Model | Airtac GC FRL Unit GC200C06C1 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC200C06C1
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC200C06C1 Is Used
Compact pick-and-place modules
Conditions air for the small cylinders and grippers of a compact pick-and-place module, where the 1/8 in ports suit tight manifolds and the MPa gauge lets the setter read the regulated pressure directly.
Electronics assembly bench slides
Feeds the pneumatic slides and fingers used on an electronics assembly bench, providing filtered, regulated, lubricated air at the low flow typical of small-format actuation.
Small air vibrators on hoppers
Runs compact piston or ball vibrators that keep material moving in small hoppers and chutes, with the regulator set at the unit and checked on the round MPa gauge.
Is the Airtac GC FRL Unit GC200C06C1 the Right Station?
The 1/8 in PT port makes this the smallest-connection step of the GC range - choose it for compact circuits and step up to the 1/4 in, 3/8 in, 1/2 in, 3/4 in or 1 in ports on GC200 to GC600 as demand grows. This version uses the differential-pressure drain and the standard 40 um element; a 5 um element (W code) and automatic or manual drains are selectable. The C1 code specifies the external round gauge with MPa scale - an embedded square gauge, or psi/bar scales, can be ordered instead. Thread is PT as standard with G (BSPP) and NPT available, and a bracket can be selected. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
Airtac GC FRL Unit GC200C06C1 FAQ
AirTAC publishes flow for the GC series as characteristic curves rather than a single rated figure, so we do not quote one number. Share your working pressure and demand and we will confirm the datasheet figures and correct sizing on request before you order.
C1 specifies the external round pressure gauge with an MPa scale. The alternatives are an embedded square gauge, or the same gauges with psi (scale 2) or bar (scale 3) scales - all orderable as catalogue variants of the same unit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC200C06C1
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.