Airtac GC FRL Unit GC200C06MF1W
The AirTAC GC FRL Unit GC200C06MF1W is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC200C06MF1W
The GC200 series is AirTAC's three-piece F.R.L. combination: separate filter, regulator and lubricator in one set. This GC200C06MF1W configuration uses the finer 5 um filter element (code W) instead of the standard 40 um, together with a PT1/8 port, a manual-drain bowl and an embedded square gauge on an MPa scale. It strips finer particulate from the compressed air, holds a steady regulated pressure and meters oil mist downstream for cylinders, valves and air tools.
This is a genuine AirTAC part. The G-series combination comes in 200, 300, 400 and 600 sizes with ports up to 1 inch, PT / G(BSPP) / NPT thread options, differential-pressure, automatic or manual drains and a choice of gauge scales. Max working pressure is 1.0 MPa (145 psi) and operating range is -5 to 70 C, non-freezing. Flow figures are published as curves rather than one rated number, so ask us and we will confirm the datasheet for your application on request.
Airtac GC FRL Unit GC200C06MF1W Technical Specifications
| Model | Airtac GC FRL Unit GC200C06MF1W |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC200C06MF1W
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC200C06MF1W Is Used
Laboratory air supply manifold
Conditions the compressed air feeding a lab bench manifold for pneumatic sample handling, where the 5 um element gives finer protection to small valves and cylinders than the standard grade.
CMM and gauging fixture air circuit
Supplies measurement and clamping fixtures around a coordinate measuring machine with cleaner-than-standard air: 5 um filtration, stable regulated pressure and controlled lubrication for clamp actuators.
Paint-line air motor drives
Runs small air motors and agitators on a coating line, with the finer element helping protect the motor's valve train, the regulator holding set speed pressure and the lubricator supplying oil mist.
Is the Airtac GC FRL Unit GC200C06MF1W the Right Station?
Pick the W grade here when the 40 um standard element is not fine enough for the downstream equipment - 5 um gives finer particulate removal at the same porting. This unit is PT1/8, the smallest 200-size port, so step to GC300/400/600 if your demand points to a larger port. Manual drain (M) means hand draining and a 0.05-0.9 MPa (7-130 psi) regulator range. The square embedded gauge reads MPa, with psi and bar scales orderable, and PT is the standard thread with G and NPT as options. Flow is published as curves, not a single rating, so let us confirm sizing against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
Airtac GC FRL Unit GC200C06MF1W FAQ
We do not quote flow numbers for the GC series because AirTAC publishes them as curves rather than a single rated figure. If finer filtration raises a concern about sizing, send us your required flow and pressure and we will confirm the appropriate size from the datasheet on request, including a larger 300/400/600 unit if needed.
The W code on this model fits the 5 um element, versus the 40 um standard. Choose 5 um when downstream valves, cylinders or instruments are sensitive to finer particulate; 40 um is the usual choice for general plant air and tool circuits. The rest of the decode is unchanged: PT1/8 port, manual drain, square MPa gauge and a 0.05-0.9 MPa (7-130 psi) regulator range on this manual-drain build.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC200C06MF1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.