Airtac GC FRL Unit GC200C06MN
The AirTAC GC FRL Unit GC200C06MN is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC200C06MN
The AirTAC GC series is a three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator piped as one set, so filtration, regulation and oil-mist lubrication are all handled in a single purchase. This 200-size configuration comes with PT1/8 ports, a manual drain on the filter bowl, the standard 40 um filter element, a standard-type regulator and no gauge fitted. Because the drain is manual, the regulator covers 0.05-0.9 MPa (7-130 psi), with a maximum working pressure of 1.0 MPa (145 psi). The 200-size bowl is PC (polycarbonate) and the unit works in temperatures from -5 to 70 C.
This is a genuine AirTAC part. The G series runs from 200 to 600 size, with larger sizes giving larger ports and more flow, plus options including automatic or differential-pressure drains, a 5 um fine filter (W code), a gauge, G (BSPP) or NPT thread, and a reverse/check valve. Flow figures are published as curves rather than a single rating, so ask us to confirm the datasheet for your application before you order.
Airtac GC FRL Unit GC200C06MN Technical Specifications
| Model | Airtac GC FRL Unit GC200C06MN |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC200C06MN
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC200C06MN Is Used
Spray booth gun feed
Mounted at a small paint or finishing booth, this FRL filters water and grit out of the gun supply, lets the operator set atomisation pressure on the regulator, and meters a light oil mist for any downstream air tools sharing the drop.
Bench air-tool station
At a maintenance workbench running impact drivers, die grinders and air ratchets, the filter keeps moisture out of the tools, the regulator holds a steady working pressure, and the lubricator feeds a continuous oil mist to extend tool life.
Small packaging machine
Feeding the cylinders of a carton sealer or small case packer, this unit cleans and dries the supply, holds the pressure the machine was set up at, and lubricates the valves and cylinders as the cycle runs.
Is the Airtac GC FRL Unit GC200C06MN the Right Station?
Keep the 200 size with its PT1/8 ports for lines with modest air demand, and step up to 300, 400 or 600 when you need larger ports and higher flow. The manual drain on this version gives the widest regulating range (0.05-0.9 MPa, 7-130 psi) but needs periodic draining of the bowl; automatic and differential-pressure drain versions remove that chore. The 40 um element is standard, or choose the W option for 5 um filtration. Thread is PT as standard, with G (BSPP) and NPT available as catalogue options, and a bracket or gauge can be specified. Flow is published as curves, not a single rating, so confirm sizing against your application with us before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
Airtac GC FRL Unit GC200C06MN FAQ
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and datasheet figures for you before you order.
You periodically open the drain to expel collected water, rather than the bowl emptying itself. The upside of the manual-drain version is the widest regulating range, 0.05-0.9 MPa (7-130 psi). If unattended draining matters, ask about the automatic or differential-pressure drain versions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC200C06MN
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.