Airtac GC FRL Unit GC200C06MNW
The AirTAC GC FRL Unit GC200C06MNW is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC200C06MNW
The AirTAC GC series is a three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator piped as one set. This 200-size configuration is built with the W option, a 5 um fine filter element instead of the 40 um standard, together with PT1/8 ports, a manual drain on the filter bowl, a standard-type regulator and no gauge. With the manual drain, the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi) and the maximum working pressure is 1.0 MPa (145 psi). The 200-size bowl is PC (polycarbonate) and the unit works from -5 to 70 C.
This is a genuine AirTAC part. The G series runs from 200 to 600 size, with larger ports and more flow at the bigger sizes, and options including automatic or differential-pressure drains, a gauge, G (BSPP) or NPT thread, and a reverse/check valve (K code). Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
Airtac GC FRL Unit GC200C06MNW Technical Specifications
| Model | Airtac GC FRL Unit GC200C06MNW |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC200C06MNW
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC200C06MNW Is Used
CNC machine tool air prep
On a CNC machining centre's pneumatic supply for tool-clamp and chip-door actuators, the 5 um element catches finer particles that standard filtration lets through, while the regulator holds the pressure the machine builder specified and the lubricator mists the actuators.
Valve island feed
Supplying a manifold of directional control valves on a small automation line, this unit dries and fine-filters the air to protect the valve spools, sets a stable working pressure, and meters lubricant to the downstream cylinders.
Lab automation actuators
On laboratory automation with small pneumatic pushers and grippers, the 5 um filtration keeps fine contamination away from compact actuators, the regulator pins the gentle working pressure, and the lubricator maintains a light oil mist.
Is the Airtac GC FRL Unit GC200C06MNW the Right Station?
Pick this W version when the 40 um standard element is too coarse for the valves or tools downstream; the 5 um element traps finer particles. The 200 size with PT1/8 ports fits modest air demand, and 300, 400 or 600 sizes give more flow. The manual drain offers the widest regulating range (0.05-0.9 MPa, 7-130 psi) but needs regular bowl draining; automatic and differential-pressure drains exist. Thread is PT as standard with G (BSPP) and NPT as catalogue options, and a gauge or bracket can be added. Flow is published as curves, not a single rating, so confirm sizing with us before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
Airtac GC FRL Unit GC200C06MNW FAQ
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Share your application details and we will confirm the flow and datasheet figures for you before you order.
The W code swaps the standard 40 um element for a 5 um fine filter, which traps finer particles that can upset sensitive valves and compact actuators. It is the right choice where air quality downstream matters; otherwise the 40 um standard keeps differential pressure lower.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC200C06MNW
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.