Airtac GC FRL Unit GC200C08F1WK
The AirTAC GC FRL Unit GC200C08F1WK is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC200C08F1WK
The GC200C08F1WK is a genuine three-piece AirTAC G-series F.R.L. combination: a separate air filter, pressure regulator and lubricator, in the 200 size with PT1/4 ports. The filter carries the finer 5 um (W) element, the bowl drains by differential pressure (the catalogue default), and the regulator is fitted with an embedded square gauge reading in MPa. A reverse (check) valve (K) is also fitted in this configuration. With the differential-pressure drain the regulator adjustment range is 0.15-0.9 MPa (20-130 psi). Maximum inlet pressure is 1.0 MPa (145 psi), bowls in the 200 size are polycarbonate, and the working temperature range is -5 to 70 C, non-freezing, on compressed air only.
This is a genuine AirTAC part from airtacdistr.com. The GC series is offered in 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, plus options for manual or automatic drains, 40 um or 5 um elements, gauge scale, and G or NPT threads in place of the PT standard. Because AirTAC publishes flow only as curves, we confirm datasheet figures for this exact configuration on request.
Airtac GC FRL Unit GC200C08F1WK Technical Specifications
| Model | Airtac GC FRL Unit GC200C08F1WK |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC200C08F1WK
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC200C08F1WK Is Used
CNC tool-clamping circuit
Feeds the 5 um-filtered, regulated and lubricated air that acts the spindle drawbar and tool-clamping cylinders on a machining centre, protecting the clamping valve from water and chips in the line.
Carton sealing line
Prepares the supply for the pneumatic cylinders that fold, press and seal cartons on a packaging conveyor, with the check valve helping the circuit hold its set pressure at the cylinders.
Automotive refinish spray booth
Conditions booth air ahead of HVLP spray guns: the 5 um element keeps water and fine particulate out of the finish, while the lubricator mists oil to the gun trigger valve and air tools.
Is the Airtac GC FRL Unit GC200C08F1WK the Right Station?
Choose the size and port step (200/300/400/600, ports 1/8 to 1 in) against the air your circuit actually uses, then set drain type: differential-pressure is the default here, while automatic (A) and manual (M) drains can be ordered instead. Element grade is 5 um on this unit versus the 40 um standard, the square gauge reads in MPa (psi and bar scales are available), and thread is PT as standard with G (BSPP) and NPT as orderable options. A mounting bracket can be specified.
Flow for the G series is published as curves, not a single rated figure, so ask us to confirm sizing for this configuration against your application before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
Airtac GC FRL Unit GC200C08F1WK FAQ
AirTAC publishes flow for the G series as curves rather than a single rated number, so we do not quote a figure on this page. Ask us and we will confirm the flow data for this exact configuration from the datasheet so you can size it against your application.
The blank drain position in the code is the catalogue default: a differential-pressure drain. Automatic (A) and manual (M) drains are available as options. Note the regulator range also follows the drain type: 0.15-0.9 MPa (20-130 psi) with the differential-pressure drain, 0.05-0.9 MPa (7-130 psi) with a manual drain.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC200C08F1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.