Airtac GC FRL Unit GC200C08MC1
The AirTAC GC FRL Unit GC200C08MC1 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC200C08MC1
The GC200C08MC1 is a genuine three-piece AirTAC G-series F.R.L. combination: a separate air filter, pressure regulator and lubricator, in the 200 size with PT1/4 ports. The filter uses the standard 40 um element, the bowl is drained manually, and the regulator carries an external round gauge reading in MPa. With the manual drain the regulator adjustment range is 0.05-0.9 MPa (7-130 psi). Maximum inlet pressure is 1.0 MPa (145 psi), bowls in the 200 size are polycarbonate, and the working temperature range is -5 to 70 C, non-freezing, on compressed air only.
This is a genuine AirTAC part from airtacdistr.com. The GC series spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, plus options for automatic or differential-pressure drains, 5 um elements, square embedded gauges, reverse valves, and G or NPT threads instead of the PT standard. Because AirTAC publishes flow only as curves, we confirm datasheet figures for this exact configuration on request.
Airtac GC FRL Unit GC200C08MC1 Technical Specifications
| Model | Airtac GC FRL Unit GC200C08MC1 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC200C08MC1
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC200C08MC1 Is Used
Assembly bench air drops
Conditions the drop lines at an assembly workbench where impact wrenches, ratchets and nutrunners draw regulated, lubricated air, with the manual drain emptied as part of the shift routine.
Pneumatic control panel supply
Sits at the inlet of a machine's pneumatic control panel, filtering and regulating the supply before it reaches solenoid valves and the round MPa gauge lets technicians read set pressure at a glance.
Truck and fleet service bay
Feeds the service bench where air impact guns, chisels and tyre cages are used on commercial vehicles, with the lubricator keeping tool motors oiled through the working day.
Is the Airtac GC FRL Unit GC200C08MC1 the Right Station?
Start with size and port (200/300/400/600, ports 1/8 to 1 in) matched to the air your circuit uses, then pick the drain: this unit is manual, which gives the widest 0.05-0.9 MPa (7-130 psi) regulation range but needs someone to drain the bowl; automatic and differential-pressure drains avoid that chore. Element grade here is the 40 um standard (5 um available), the round gauge reads in MPa, and thread is PT as standard with G (BSPP) and NPT as orderable options.
Flow is published as curves rather than a single rated figure, so ask us to confirm this configuration against your required flow before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
Airtac GC FRL Unit GC200C08MC1 FAQ
AirTAC publishes G-series flow as curves, not as a single rated figure, so there is no one number we can quote here. Request the datasheet from us and we will confirm the flow data for this configuration so you can size the unit properly.
Units with a regulator come with an embedded square gauge as the catalogue standard; this configuration instead specifies the external round gauge with an MPa scale. Psi and bar scales are also orderable, and the N code omits the gauge entirely if you prefer to mount your own.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC200C08MC1
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.