Airtac GC FRL Unit GC200C08MNW
The AirTAC GC FRL Unit GC200C08MNW is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC200C08MNW
The AirTAC GC series is a three-unit F.R.L. combination: separate filter, regulator and lubricator assembled as one set. This GC200C08MNW is the 200 size with PT1/4 ports, a manual-drain filter bowl and the fine 5 um filter element (W), which removes smaller water droplets and particulate than the standard 40 um grade. It regulates downstream pressure and meters oil mist, with no gauge fitted (N).
This is a genuine AirTAC part. Maximum working pressure is 1.0 MPa (145 psi), the manual-drain regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), and the temperature range is -5 to 70 C, non-freezing. The 200-size bowl is polycarbonate (PC). AirTAC publishes flow as curves rather than a single rated figure, so contact us and we will confirm flow and datasheet figures for your application on request.
Airtac GC FRL Unit GC200C08MNW Technical Specifications
| Model | Airtac GC FRL Unit GC200C08MNW |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC200C08MNW
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC200C08MNW Is Used
Lab instrument air supply
Conditions the air feeding benchtop analytical instruments and pneumatic sample handlers, where the 5 um element removes finer water and dirt than a standard element and the regulator holds a steady operating pressure.
Fine-finish spray station
Prepares air for a detail spray gun or airbrush line: the 5 um element cuts finer contamination, the regulator gives a stable atomising pressure, and the lubricator can be set for oil-free delivery to the gun.
CNC tool-clamp circuit
Feeds the drawbar or tool-clamp cylinder of a small CNC machining centre, where cleaner 5 um air protects the clamping valve and cylinder and the regulator holds the clamp pressure consistently.
Is the Airtac GC FRL Unit GC200C08MNW the Right Station?
Size 200 with 1/4 in (08) PT ports is the compact step of the G series; choose 300, 400 or 600 where demand exceeds a 1/4 in line. The manual drain means the bowl is drained by hand at intervals; automatic and differential-pressure drain variants are available. This code specifies the W element - 5 um filtration - against the 40 um standard, so pick it when downstream valves and instruments need cleaner air. No gauge is fitted (N); gauge-equipped variants are catalogue items. Thread is PT as standard, with G (BSPP) and NPT as orderable options, and a bracket is included. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
Airtac GC FRL Unit GC200C08MNW FAQ
AirTAC publishes flow for the G series as performance curves rather than a single rated figure, so we do not quote one number here. Send your pressure and air-demand details and we will confirm the flow and datasheet figures for this unit on request.
The W in this code selects the 5 um element, which captures finer water droplets and particles than the 40 um standard. Choose it for spray finishing, instruments and precision valves; keep the 40 um grade for general cylinder and tool circuits where finer filtration is not required and lower element restriction is preferred.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC200C08MNW
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.