Airtac GC FRL Unit GC300C08F1
The AirTAC GC FRL Unit GC300C08F1 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC300C08F1
GC300C08F1 is a three-piece AirTAC G-series F.R.L. combination: a separate air filter, pressure regulator and lubricator, assembled for 1/4 in. PT pipework. The filter removes water and particulate with the standard 40 um element and a differential-pressure drain; the regulator holds your set downstream pressure over a 0.15-0.9 MPa (20-130 psi) range; the lubricator meters oil mist to downstream cylinders and tools. The F1 option adds a square external gauge scaled in MPa for a clear panel-style pressure readout. Compressed air is the only medium.
This is a genuine AirTAC part from the G series, which spans 200, 300, 400 and 600 sizes with ports from 1/8 in. to 1 in. and PT, G (BSPP) or NPT threads. On the 300 size the filter and lubricator bowls are PC (polycarbonate). Operating temperature is -5 to 70 C (non-freezing) and maximum working pressure is 1.0 MPa (145 psi). Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and the full datasheet for your application on request.
Airtac GC FRL Unit GC300C08F1 Technical Specifications
| Model | Airtac GC FRL Unit GC300C08F1 |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC300C08F1
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-C0 filter, GR300-C0 regulator and GL300-C0 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · See datasheet · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-C0 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC300C08F1 Is Used
Compressor room take-off point
Mounted at the take-off from a workshop compressor header, giving a dedicated branch of filtered, regulated, lubricated air with the square gauge readable at a glance from the wall.
Pick-and-place station supply
Conditions the air feeding the vacuum generators and gripper cylinders on a PLC-controlled pick-and-place station, keeping actuator pressure stable from cycle to cycle.
Belt-conveyor pneumatics
Supplies the hold-down cylinders, diverters and belt-tensioners on a conveyor line, with the 40 um element keeping line debris out of the control valves.
Is the Airtac GC FRL Unit GC300C08F1 the Right Station?
This GC300 code is built for PT1/4 lines; step to GC200, GC400 or GC600 where ports or flow demand differ. The F1 here selects the square MPa gauge - round (C) is the alternative, and scales of psi (2) or bar (3) can be ordered. Element is the 40 um standard grade; choose W codes for the 5 um fine grade. Drain is differential-pressure on this code; automatic (A) and manual (M) variants exist, with the regulator span at 0.15-0.9 MPa (20-130 psi) for differential-pressure and automatic, 0.05-0.9 MPa (7-130 psi) for manual. K codes add a reverse valve. Thread is PT as standard; G (BSPP) and NPT are orderable options. Flow appears only as curves, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-C0 regulator with a GF300-C0 filter on that branch.
Airtac GC FRL Unit GC300C08F1 FAQ
AirTAC does not publish a single rated-flow figure for the GC300 series - performance is given as curves. Send us your application pressures and air consumption and we will confirm the correct size and provide the datasheet on request.
The F1 code selects a square external gauge scaled in MPa, while C1 selects a round gauge with the same MPa scale. Both sit on the same three-piece F.R.L. with a PT1/4 port, 40 um element and differential-pressure drain; gauge style is purely the readout choice.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC300C08F1
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.