Airtac GC FRL Unit GC300C08F1K
The AirTAC GC FRL Unit GC300C08F1K is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC300C08F1K
The AirTAC GC series is a three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator ordered and installed as one set. This configuration is size 300 with a PT1/4 (1/4 inch) port, differential-pressure drain on the filter bowl, standard 40 um filtration, an embedded square MPa gauge on the regulator, and a reverse (check) valve fitted so downstream pressure is held if the supply drops. The set filters water and particulate, regulates pressure and meters oil mist to downstream equipment, with a maximum working pressure of 1.0 MPa (145 psi) and an operating range of -5 to 70 C (non-freezing). The 300-size bowls are PC (polycarbonate).
This is a genuine AirTAC part. The GC combination is available in sizes 200, 300, 400 and 600 with a choice of port, thread (PT standard; G and NPT as catalogue options), drain type, filter grade, gauge style and scale, and the K check-valve option. Flow is published as curves rather than a single rated figure; we confirm the datasheet and sizing for your application on request.
Airtac GC FRL Unit GC300C08F1K Technical Specifications
| Model | Airtac GC FRL Unit GC300C08F1K |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC300C08F1K
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-C0 filter, GR300-C0 regulator and GL300-C0 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · See datasheet · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-C0 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC300C08F1K Is Used
CNC machining center air prep
Feeds filtered, regulated and lubricated air to the tool-changer and clamping cylinders on a machining center, with the check valve holding clamp pressure if the shop supply dips mid-cycle.
Packaging line actuator supply
Conditions the air feeding transfer cylinders and diverters on a carton packaging conveyor, keeping moisture and debris out of the valves while oil mist lubricates the seals.
Pneumatic press drop
A point-of-use F.R.L. set at a bench pneumatic press, giving the operator a visible MPa gauge to set working pressure and a check valve that maintains the set pressure during supply fluctuations.
Is the Airtac GC FRL Unit GC300C08F1K the Right Station?
Size 300 with a PT1/4 port suits circuits plumbed at 1/4 inch; step down to size 200 for compact drops or up to 400/600 for larger porting and higher flow demand. The differential-pressure drain flushes the filter bowl automatically as the pressure differential builds, so no daily manual draining is needed, and the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi). Standard filtration is 40 um; specify W for 5 um where finer protection matters. The square MPa gauge is embedded in the regulator, with round external gauges and psi/bar scales available to order. Thread is PT as standard, with G (BSPP) and NPT as catalogue options. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-C0 regulator with a GF300-C0 filter on that branch.
Airtac GC FRL Unit GC300C08F1K FAQ
AirTAC publishes flow for the GC series as performance curves, not a single rated figure, so we do not quote a number on this page. Send us your required flow and working pressure and we will confirm the datasheet curve and check that the size 300 / PT1/4 configuration suits your application.
K fits a reverse (check) valve, so air downstream of the set is held if the upstream supply pressure falls. That protects circuits such as clamps or holding cylinders from losing position during a supply dip. If you do not need that function, the same set is available without the K option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC300C08F1K
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.