Airtac GC FRL Unit GC300C10AC1
The AirTAC GC FRL Unit GC300C10AC1 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC300C10AC1
The GC300C10AC1 is a genuine AirTAC G-series three-unit F.R.L. combination: separate filter, regulator and lubricator ordered as one set. This configuration is size 300 with 3/8 in PT ports, the 40 um standard filter element, automatic drain on the filter bowl, and a round external pressure gauge on the MPa scale. It cleans, regulates and lubricates compressed air at a point of use, with the automatic drain ejecting collected condensate without manual attention.
This is a genuine AirTAC part within a G-series range running from size 200 to 600 with 1/8 in to 1 in ports, automatic, manual or differential-pressure drains, 40 um or 5 um grades, embedded square or external round gauges in MPa, psi or bar scales, and G (BSPP) or NPT threads as options. Max working pressure is 1.0 MPa (145 psi); temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so we confirm datasheet figures on request.
Airtac GC FRL Unit GC300C10AC1 Technical Specifications
| Model | Airtac GC FRL Unit GC300C10AC1 |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC300C10AC1
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-C1 filter, GR300-C1 regulator and GL300-C1 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · See datasheet · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-C1 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC300C10AC1 Is Used
Food packaging line air prep
A 3/8 in conditioning station for wrapper and filler cylinders on a food packaging line, where the automatic drain handles condensate on lines running without an operator at the unit.
Case erector and carton sealer feed
Supplying the vacuum cups and fold cylinders of a case erector or carton sealer, with filtered, regulated and lubricated air from one point of use.
Welding cell fixture clamps
Conditioning the air feeding fixture clamps and positioner actuators in a robotic welding cell, with the MPa round gauge giving the cell technician a visible set pressure.
Is the Airtac GC FRL Unit GC300C10AC1 the Right Station?
Size 300 with 3/8 in PT ports sits a step above the 1/4 in machines in the G-series, for lines where larger ports match the supply plumbing; sizes 200 to 600 are available as flow needs change. The A code here selects the automatic drain, which gives a regulator range of 0.15-0.9 MPa (20-130 psi); the manual-drain variant spans 0.05-0.9 MPa (7-130 psi). Filtration is the 40 um standard grade, with 5 um (W) for finer duty. The C1 code fits the external round gauge with MPa scale; square embedded gauges and psi or bar scales are alternatives. Thread is PT as standard with G (BSPP) and NPT orderable, and a bracket is included by default. Flow appears only as curves, so ask us to confirm sizing from the datasheet before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-C1 regulator with a GF300-C1 filter on that branch.
Airtac GC FRL Unit GC300C10AC1 FAQ
AirTAC publishes G-series flow as curves rather than a single rated figure, so no one number is quoted here. Give us your line pressure, downstream demand and acceptable pressure drop, and we will confirm sizing from the datasheet on request.
A selects the automatic drain on the filter bowl instead of the default differential-pressure or manual types, and C1 fits the external round pressure gauge with MPa scale. With the automatic drain, the regulator adjusts over 0.15-0.9 MPa (20-130 psi). Thread is PT as standard, with G (BSPP) and NPT as catalogue options.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC300C10AC1
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.