Airtac GC FRL Unit GC300C10AF1K
The AirTAC GC FRL Unit GC300C10AF1K is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC300C10AF1K
The GC300C10AF1K is a three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator that together remove water and particulate, hold a set downstream pressure and feed oil mist to downstream tools. Sized for 3/8 in PT ports, this configuration carries the standard 40 um filter element, an automatic drain on the filter bowl, the standard regulator type with an embedded square MPa gauge, and a reverse/check valve fitted to hold upstream pressure.
This is a genuine AirTAC part. The G-series combination is offered in 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, in PT (standard), G or NPT thread, with a choice of drain type, 40 um or 5 um filtration, gauge type and scale, and optional check valve. Maximum working pressure is 1.0 MPa (145 psi); temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so we confirm datasheet figures on request.
Airtac GC FRL Unit GC300C10AF1K Technical Specifications
| Model | Airtac GC FRL Unit GC300C10AF1K |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC300C10AF1K
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-C1 filter, GR300-C1 regulator and GL300-C1 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · See datasheet · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-C1 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC300C10AF1K Is Used
Packaging line stopper and clamp cylinders
Filtered, regulated and lubricated air at a set pressure keeps carton-clamping and stopping cylinders on a packaging conveyor acting consistently through the shift.
CNC machine tool air supply
Feeds the tool-change and clamping circuits of a machining centre with clean, pressure-stabilised and lubricated air, with the check valve helping hold supply if the main line dips.
Bottling plant actuator circuits
Supplies gate, divertor and capping actuators on a bottling line from a shared compressed-air header, with automatic draining of condensed water from the filter bowl.
Is the Airtac GC FRL Unit GC300C10AF1K the Right Station?
Step up or down in size (200/300/400/600) to match the port and air demand of the machine; this 300 set suits 3/8 in PT pipework. The regulator with automatic drain adjusts over 0.15-0.9 MPa (20-130 psi). Choose the 40 um standard element for general plant air or the 5 um (W) element for finer pre-filtration; the automatic drain empties the polycarbonate bowl without operator attention. The F1 code gives the embedded square gauge on an MPa scale (psi and bar scales are orderable), and K adds the reverse/check valve. PT is the standard thread; G and NPT are catalogue options to order, and a mounting bracket is optional.
Flow for this series is published as curves, not a single rated figure, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-C1 regulator with a GF300-C1 filter on that branch.
Airtac GC FRL Unit GC300C10AF1K FAQ
AirTAC publishes flow for this series as performance curves rather than a single rated figure, so there is no one number we can honestly quote. Tell us your operating pressure and demand and we will confirm the sizing from the datasheet on request.
K means a reverse/check valve is fitted in the regulator section, allowing flow in one direction only. The same combination without K (for example GC300C10AF1W) is supplied without the check valve; the rest of the code decodes identically.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC300C10AF1K
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.