Airtac GC FRL Unit GC300C10ANW
The AirTAC GC FRL Unit GC300C10ANW is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC300C10ANW
The AirTAC GC series combines three separate treatment units in one set: a filter, a pressure regulator and a lubricator. This configuration is the size 300 set with 3/8 in PT ports, automatic drain on the filter bowl, and the finer 5 um filter element (the W code) instead of the standard 40 um. No gauge is fitted and no reverse valve is included. Maximum working pressure is 1.0 MPa (145 psi), the regulator adjustment range is 0.15-0.9 MPa (20-130 psi), and operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. GC sets span sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and G (BSPP) or NPT threads are catalogue options next to the PT standard. The size 300 filter and lubricator bowls are PC (polycarbonate). Flow for the series is published as curves rather than a single rating, so we confirm sizing and datasheet figures on request.
Airtac GC FRL Unit GC300C10ANW Technical Specifications
| Model | Airtac GC FRL Unit GC300C10ANW |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC300C10ANW
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-C1 filter, GR300-C1 regulator and GL300-C1 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · See datasheet · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-C1 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC300C10ANW Is Used
Paint spray booth supply
Conditions air feeding spray guns in a paint booth, where the 5 um element helps keep water and particulate out of the atomizing air before it reaches the gun.
Pneumatic control panel supply
Prepares the branch feeding a machine's directional-valve panel, with the regulator set once to the pressure the valve stack and actuators are specified for.
Laboratory automation actuator air
Filters, regulates and lubricates the supply to lab automation grippers and lift cylinders, where the finer 5 um grade suits sensitive downstream components.
Is the Airtac GC FRL Unit GC300C10ANW the Right Station?
Choose size 300 with 3/8 in ports when your air demand falls between the smaller 200 and the larger 400/600 sets. Drain here is automatic; manual and differential-pressure drain variants exist if you prefer manual purging or a schedule-driven setup. The W code selects the 5 um element - pick it when downstream valves and tools need finer filtration than the standard 40 um. The N code means no gauge; an embedded square gauge or an external round gauge on MPa, psi or bar scales can be specified instead. Thread is PT standard, with G (BSPP) and NPT available as catalogue options. Since flow appears only as curves, ask us to confirm sizing for your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-C1 regulator with a GF300-C1 filter on that branch.
Airtac GC FRL Unit GC300C10ANW FAQ
There is no single rated flow figure for G-series units - AirTAC publishes flow as performance curves. Share your required flow and pressure and we will confirm sizing against the datasheet on request.
The blank filter code is the standard 40 um grade; the W code selects the finer 5 um element. Choose 5 um for downstream equipment that is sensitive to finer particulate, and note that finer filtration generally needs earlier element attention.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC300C10ANW
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.