Airtac GC FRL Unit GC300C10C1WK
The AirTAC GC FRL Unit GC300C10C1WK is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC300C10C1WK
GC300C10C1WK is an AirTAC G-series three-unit F.R.L. combination: separate filter, regulator and lubricator units assembled as one set for cleaning, regulating and lubricating compressed air. This 300-size configuration is ported PT3/8, uses the differential-pressure drain, carries the 5 um fine filtration grade (W option), includes a reverse (check) valve (K), and is fitted with a round MPa pressure gauge. The regulator adjusts from 0.15 to 0.9 MPa (20-130 psi) with this drain type, and the set handles compressed air at up to 1.0 MPa (145 psi) inlet in a -5 to 70 C (non-freezing) environment.
This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes from 1/8 in to 1 in ports, and this 300 size uses PC (polycarbonate) bowls on the filter and lubricator sections. Flow for the series is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet and sizing figures for your application on request.
Airtac GC FRL Unit GC300C10C1WK Technical Specifications
| Model | Airtac GC FRL Unit GC300C10C1WK |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC300C10C1WK
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-C1 filter, GR300-C1 regulator and GL300-C1 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · See datasheet · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-C1 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC300C10C1WK Is Used
Air-knife drying stations on a wash line
Conditions the supply to air-knife nozzles drying parts exiting a wash section, where the check valve and 5 um grade support a clean, directed air job.
Robotic end-of-arm grippers in an assembly cell
Feeds the gripper cylinders on a robot end-of-arm tooling set, combining fine filtration, stable regulated pressure and oil-mist lubrication at the cell drop.
Sorting-module actuators in a distribution hub
Supplies the pusher and gate actuators across sorting modules in a distribution hub, keeping each module fed with filtered, regulated, lubricated air.
Is the Airtac GC FRL Unit GC300C10C1WK the Right Station?
This code combines two options on the 300-size, PT3/8 body: W for the 5 um filtration grade instead of the 40 um standard, and K for a fitted reverse (check) valve. If you need the coarser standard element or no check valve, the adjacent codes in this series cover those variants. The differential-pressure drain runs without daily attention; automatic and manual drains are orderable. The gauge is the round MPa type, with a square gauge available. PT is the standard thread and G (BSPP) or NPT can be ordered as catalogue options. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-C1 regulator with a GF300-C1 filter on that branch.
Airtac GC FRL Unit GC300C10C1WK FAQ
There is no single rated flow number for this unit: AirTAC publishes G-series flow as curves only. Ask us and we will confirm the datasheet and read the curve for this 300-size, 3/8 in configuration against your demand on request.
This configuration uses the differential-pressure drain, the default for the GC series. Automatic (A) and manual (M) drain variants are orderable on the same 300-size body if your maintenance routine prefers them.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC300C10C1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.