Airtac GC FRL Unit GC300C10MF1W
The AirTAC GC FRL Unit GC300C10MF1W is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC300C10MF1W
The AirTAC GC series is a three-unit F.R.L. combination made up of a separate air filter, pressure regulator and lubricator, so filtration, regulation and oil-mist lubrication happen in the right order in one mounted set. This GC300C10MF1W is the 300 size with PT3/8 (PT thread) ports, a manual drain on the filter bowl, a 5 um filter element (W grade) and an embedded square pressure gauge scaled in MPa. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts 0.05-0.9 MPa (7-130 psi) with the manual drain, the working temperature range is -5 to 70 C (non-freezing), and the 300-size filter bowl is PC (polycarbonate).
This is a genuine AirTAC part. The GC family comes in 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch, PT as the standard thread and G (BSPP) or NPT as catalogue options, plus a choice of drain types, 40 um or 5 um elements and gauge variants. Published flow data appears as curves rather than a single rating, so we confirm the datasheet and sizing figures for your application on request.
Airtac GC FRL Unit GC300C10MF1W Technical Specifications
| Model | Airtac GC FRL Unit GC300C10MF1W |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC300C10MF1W
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-C1 filter, GR300-C1 regulator and GL300-C1 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · See datasheet · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-C1 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC300C10MF1W Is Used
Laboratory automation benches
Conditions the air feeding grippers, linear actuators and aspirator pumps on lab automation benches, where the 5 um element and MPa gauge support clean, repeatable set-ups.
Robotics cell end-of-arm tooling
Feeds regulated, lubricated air to grippers and sensors on a pick-and-place robot cell, with the 5 um grade protecting fine valves and the manual drain for planned service stops.
Truck body building and repair bays
Supplies impact wrenches, air ratchets and spray equipment in a commercial vehicle repair bay, combining filtration, regulation and oil-mist lubrication at one 3/8 inch station.
Is the Airtac GC FRL Unit GC300C10MF1W the Right Station?
Pick the GC200, GC300, GC400 or GC600 body to match your port size and air demand; this model is the 300 size with 3/8 inch PT ports. The drain is manual here, which permits the wider 0.05-0.9 MPa regulator range; automatic and differential-pressure drains carry a 0.15-0.9 MPa (20-130 psi) range. The 5 um element (W) suits finer filtration; 40 um is the standard grade. The square gauge is scaled in MPa, with other scales and a no-gauge (N) variant available. Thread is PT as standard, G and NPT are order options, and a bracket is optional. Flow is published as curves, not a single number, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-C1 regulator with a GF300-C1 filter on that branch.
Airtac GC FRL Unit GC300C10MF1W FAQ
There is no single rated flow figure for this unit: AirTAC publishes flow as characteristic curves. Share your working pressure and required air consumption and we will confirm the matching curve and datasheet figures for this model on request before you order.
The W code gives a 5 um element, which removes finer particulate than the standard 40 um grade - useful ahead of precision valves, sensors and pneumatic instrumentation. It is the finer option in the same 300-size body; the 40 um standard grade remains available if your application does not need it.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC300C10MF1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.