Airtac GC FRL Unit GC300C10N
The AirTAC GC FRL Unit GC300C10N is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC300C10N
GC300C10N is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator covering filtration, pressure regulation and oil-mist lubrication on one compressed-air line. This 300-size set is ported PT3/8 (3/8 in). The filter bowl uses the differential-pressure drain (the series default) and the standard 40 um element, and the standard-type regulator adjusts from 0.15 to 0.9 MPa (20-130 psi). No gauge and no reverse valve are included in this configuration. Maximum working pressure is 1.0 MPa (145 psi) and the operating range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The G series runs in 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in, PT, G (BSPP) and NPT thread options, differential-pressure, automatic or manual drains, 40 um or 5 um filtration, gauge choices and optional brackets. In this 300 size the filter and lubricator bowls are polycarbonate. AirTAC publishes G-series flow as curves rather than a single rated figure, so ask us to confirm the datasheet numbers for your application.
Airtac GC FRL Unit GC300C10N Technical Specifications
| Model | Airtac GC FRL Unit GC300C10N |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC300C10N
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-C1 filter, GR300-C1 regulator and GL300-C1 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · See datasheet · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-C1 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC300C10N Is Used
Workshop air tool drops
Filtering, regulating and lubricating the branch air feeding impact wrenches, ratchets and grinders at a maintenance workshop drop.
Assembly bench tool air
Conditioning the supply to bench-mounted pneumatic screwdrivers and riveters on a manual assembly line, with the differential-pressure drain handling routine condensate.
Material handling actuators
Air preparation for the pusher, stopper and lift cylinders along a sorting conveyor, all supplied from one 3/8 in PT take-off.
Is the Airtac GC FRL Unit GC300C10N the Right Station?
Pick the size (200/300/400/600) and port step against actual air consumption; this 300 set is ported 3/8 in PT. Drain type: this code uses the differential-pressure default, which suits steady running duty, while manual drain suits supervised installs and automatic drain suits unattended lines. The 40 um element is the standard grade; the W variant gives 5 um. This set is supplied without a gauge; embedded square gauges and external round gauges with MPa, psi or bar scales are catalogue options. PT is the standard thread, with G (BSPP) and NPT orderable, and brackets are optional. Flow is published as curves, not one rated number - ask us to check the curves against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-C1 regulator with a GF300-C1 filter on that branch.
Airtac GC FRL Unit GC300C10N FAQ
AirTAC publishes G-series capacity as flow curves rather than a single rated figure, so no single number is stated here. Give us your inlet pressure and air demand and we will confirm the flow from the datasheet on request before you order.
The N in this code means the set is supplied without a gauge. The catalogue offers an embedded square gauge and an external round gauge, each with MPa, psi or bar scale choices, so a gauged variant of the same 300-size, 3/8 in PT combination can be ordered.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC300C10N
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.