Airtac GC FRL Unit GC300C10NW
The AirTAC GC FRL Unit GC300C10NW is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC300C10NW
GC300C10NW is a genuine AirTAC G-series three-unit F.R.L. combination: separate air filter, pressure regulator and oil-mist lubricator conditioning compressed air as one set. This configuration is size 300 with PT3/8 in ports, differential-pressure drain, 5 um fine filtration (the W option), no gauge and no reverse valve. In use the 5 um element strips finer particulate than the standard 40 um grade, the regulator holds a set downstream pressure (0.15-0.9 MPa / 20-130 psi on this drain type), and the lubricator meters oil mist downstream. Maximum working pressure is 1.0 MPa (145 psi), media is compressed air only, operating range -5 to 70 C (non-freezing). At size 300 the filter and lubricator bowls are PC (polycarbonate); the regulator has no bowl.
The G series is available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, plus drain, filtration grade, gauge and thread options. Published figures cover function, ports, pressures and temperature; flow is published as curves rather than a single rating, so we confirm datasheet and sizing figures on request.
Airtac GC FRL Unit GC300C10NW Technical Specifications
| Model | Airtac GC FRL Unit GC300C10NW |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC300C10NW
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-C1 filter, GR300-C1 regulator and GL300-C1 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · See datasheet · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-C1 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC300C10NW Is Used
Analytical instrument air
Conditioning shop air feeding pneumatic samplers and valve actuators around lab-scale analysers, where 5 um filtration keeps finer debris out of pilot lines.
Electronics assembly fixtures
Supplying clamping fixtures and part-ejection cylinders on PCB assembly benches, with oil mist protecting the small cylinders cycle after cycle.
Process valve actuation panels
Conditioning supply air to pneumatic ball-valve actuators on a process skid; the 5 um element protects pilot solenoids and the lubricator serves the actuator seals.
Is the Airtac GC FRL Unit GC300C10NW the Right Station?
Pick the size (200 to 600) to match your port and demand; this 300 unit is PT3/8 in. Choose filtration: 40 um standard or the 5 um W grade fitted here for finer protection. Drain is differential-pressure (default), or specify A automatic or M manual. Gauges can be omitted (N, as here) or ordered round or square with MPa, psi or bar scale. PT is the standard thread, with G (BSPP) and NPT as catalogue options. Flow is published as curves rather than a single rating, so ask us to confirm sizing before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-C1 regulator with a GF300-C1 filter on that branch.
Airtac GC FRL Unit GC300C10NW FAQ
There is no single rated flow figure to quote: AirTAC publishes GC-series flow as curves. Send us your working pressure and demand and we will confirm the flow and datasheet figures for this PT3/8 in, 5 um unit on request.
40 um is the standard grade for general water and particulate removal; the W option (fitted in this GC300C10NW) gives 5 um for finer protection of pilot valves and close-tolerance components. Choose 5 um when downstream devices are sensitive to small debris.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC300C10NW
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.