Airtac GC FRL Unit GC300C15F1W
The AirTAC GC FRL Unit GC300C15F1W is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC300C15F1W
GC300C15F1W is a three-piece AirTAC G-series F.R.L. combination: a separate air filter, a pressure regulator and an air lubricator, plumbed for 1/2 in. PT ports. The W suffix specifies the optional 5 um filter element instead of the 40 um standard, and the drain is the default differential-pressure type. The regulator is the standard version with the embedded square gauge reading in MPa (F1). It runs on compressed air at up to 1.0 MPa (145 psi) and -5 to 70 C, with polycarbonate bowls on the filter and lubricator at this size.
This is a genuine AirTAC part from the GC range, which covers 200, 300, 400 and 600 sizes from 1/8 to 1 in. ports, with a choice of drain type, filter grade, gauge scale, reverse valve and thread. Flow is published only as curves rather than a single rated figure, so we confirm the datasheet numbers for your exact model on request.
Airtac GC FRL Unit GC300C15F1W Technical Specifications
| Model | Airtac GC FRL Unit GC300C15F1W |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC300C15F1W
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-C1 filter, GR300-C1 regulator and GL300-C1 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · See datasheet · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-C1 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC300C15F1W Is Used
SMT pick-and-place feed
Feeding 5 um-filtered, regulated and lubricated air to the placement heads and board-clamp cylinders of an SMT pick-and-place line.
Laboratory sample handlers
Preparing air for gripper and lift cylinders on automated laboratory sample-handling and plate-moving equipment, where the 5 um element keeps fine particulate out.
Trailer assembly tool stations
Air treatment for impact wrenches and riveting tools at trailer and truck-body assembly stations, with a 1/2 in. supply feeding several tool drops.
Is the Airtac GC FRL Unit GC300C15F1W the Right Station?
Size 300 with PT1/2 ports suits lines needing the larger G-series step; compare against 200, 300, 400 and 600 as your flow demand changes. The 5 um element (W) is the right pick where finer particulate must be caught; the 40 um standard remains available. The drain here is the differential-pressure default, with automatic and manual drains as alternatives. The F1 square gauge reads MPa, and psi or bar scales plus an external round gauge can be ordered.
PT is the standard thread; G (BSPP) and NPT versions are catalogue options. Because rated flow is published only as curves, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-C1 regulator with a GF300-C1 filter on that branch.
Airtac GC FRL Unit GC300C15F1W FAQ
AirTAC publishes GC-series flow only as curves, so there is no single rated number we can state. Give us your application pressure and demand and we will pull the datasheet curve and confirm sizing for this exact model on request.
W specifies the optional 5 um filter element instead of the 40 um standard. Both grades are available on the GC filter stage; tell us what contamination you need to catch and we will confirm the right grade and code.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC300C15F1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.