Airtac GC FRL Unit GC300C15F1WK
The AirTAC GC FRL Unit GC300C15F1WK is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC300C15F1WK
GC300C15F1WK is a three-piece AirTAC G-series F.R.L. combination: a separate air filter, a pressure regulator and an air lubricator, plumbed for 1/2 in. PT ports. The W suffix specifies the 5 um filter element, the drain is the default differential-pressure type, the regulator is the standard version with the embedded square gauge reading in MPa (F1), and the K suffix means a reverse (check) valve is fitted. It runs on compressed air at up to 1.0 MPa (145 psi) and -5 to 70 C, with polycarbonate bowls on the filter and lubricator at this size.
This is a genuine AirTAC part from the GC range, which covers 200, 300, 400 and 600 sizes from 1/8 to 1 in. ports, with a choice of drain type, filter grade, gauge scale, reverse valve and thread. AirTAC publishes flow only as curves rather than a single rated figure, so we confirm the datasheet and flow data for your exact model on request.
Airtac GC FRL Unit GC300C15F1WK Technical Specifications
| Model | Airtac GC FRL Unit GC300C15F1WK |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC300C15F1WK
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-C1 filter, GR300-C1 regulator and GL300-C1 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · See datasheet · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-C1 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC300C15F1WK Is Used
Glass and tile vacuum gantries
Supplying treated air to the cylinders and vacuum ejectors of a glass-sheet or tile handling gantry, with the 5 um element for fine particulate and the K check valve in the circuit.
Water-treatment valve skid
Air preparation for quarter-turn pneumatic actuators on a water-treatment valve skid, ordered with the reverse-valve option for this installation.
Packaging machine actuation
Feeding regulator-set air to the sealing jaws, product pushers and form stations of a horizontal flow-wrap packaging machine.
Is the Airtac GC FRL Unit GC300C15F1WK the Right Station?
Size 300 with PT1/2 ports is the larger mid-step of the G series; step between 200, 300, 400 and 600 to match your pipe and demand. The 5 um element (W) catches finer particulate than the 40 um standard, and the K suffix adds the reverse (check) valve - specify the same code without K if you do not want it. The drain is the differential-pressure default, with automatic and manual alternatives. The F1 square gauge reads MPa; psi and bar scales and an external round gauge are options.
PT is the standard thread; G (BSPP) and NPT versions are catalogue options. Since rated flow is published only as curves, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-C1 regulator with a GF300-C1 filter on that branch.
Airtac GC FRL Unit GC300C15F1WK FAQ
Flow for the GC series is published as curves rather than a single rated figure, so we do not quote a number on the page. Share your line pressure and air demand and we will confirm the datasheet curve and sizing for this exact model on request.
This code leaves the drain position blank, so it is specified with the differential-pressure drain, the GC default. Automatic (A) and manual (M) drains are catalogue alternatives - tell us your duty cycle and we will confirm the right choice.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC300C15F1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.