Airtac GC FRL Unit GC300C15MC1W
The AirTAC GC FRL Unit GC300C15MC1W is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC300C15MC1W
The AirTAC GC series is a three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator delivered as one set. This GC300C15MC1W is built in size 300 with 1/2 in PT ports, a manual drain on the filter bowl, the optional 5 um (W) filter element and an external round pressure gauge with MPa scale. It strips water and fine particulate from compressed air, holds a set downstream pressure and meters oil mist into the line.
This is a genuine AirTAC part. The GC series spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, with differential-pressure, automatic or manual drains, a 40 um standard or 5 um (W) element, embedded square or external round gauges in MPa, psi or bar scales, and PT, G or NPT threads. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating; ask us and we will confirm the datasheet figures for your application.
Airtac GC FRL Unit GC300C15MC1W Technical Specifications
| Model | Airtac GC FRL Unit GC300C15MC1W |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC300C15MC1W
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-C1 filter, GR300-C1 regulator and GL300-C1 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · See datasheet · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-C1 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC300C15MC1W Is Used
Laboratory and pilot-plant instrumentation
Supply pneumatic controls on a laboratory analyzer or pilot-plant skid. The 5 um element protects sensitive pilot valves, transducers and gauges from fine particulate while the regulator holds the set supply pressure and the lubricator conditions actuator air.
Precision pneumatic clamping fixtures
Feed the clamping circuits of a machining fixture where fine particles could upset small pilot valves. The 5 um element cleans the supply, the regulator holds the clamp pressure and the manual drain lets operators purge the bowl each shift.
Printing press pneumatics
Run the cylinder and valve circuits on a printing press. The W-grade element filters the shop air more finely before it reaches the register and impression controls, while the regulator and lubricator condition the supply to the press.
Is the Airtac GC FRL Unit GC300C15MC1W the Right Station?
Size 300 with 1/2 in PT ports sits mid-range in the GC series; step up to 400 or 600, or down to 200, with the matching port if your line demands it. The W suffix specifies the 5 um element instead of the 40 um standard, for finer particulate protection; water removal is still the job of the filter bowl with its manual drain. The manual drain widens the regulator adjustment range to 0.05-0.9 MPa (7-130 psi); automatic and differential-pressure drain versions adjust between 0.15-0.9 MPa (20-130 psi). The C1 suffix specifies an external round gauge on MPa scale. PT is the standard thread, with G (BSPP) and NPT as order options. Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-C1 regulator with a GF300-C1 filter on that branch.
Airtac GC FRL Unit GC300C15MC1W FAQ
AirTAC publishes GC series flow data as performance curves, not as a single rated figure, so we do not quote a number here. Tell us your working pressure and air demand and we will confirm the datasheet curve for this size 300, 1/2 in unit against your application before you order.
The standard 40 um element suits general plant air; this W version carries the optional 5 um element for finer protection of pilot valves, instrumentation and air tools. Note the grade concerns particulate only: water is still removed by the filter bowl, which here is drained manually.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC300C15MC1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.