Airtac GC FRL Unit GC400C10F1W
The AirTAC GC FRL Unit GC400C10F1W is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
- TypeF.R.L. combination (3 units)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GC FRL Unit GC400C10F1W
The GC series is AirTAC's three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator working together to clean, regulate and lubricate compressed air on one supply line. This 400-size set is ported PT3/8 and carries the fine 5 um (W) filter element, the differential-pressure drain as its bowl drain, and an embedded square pressure gauge with an MPa scale. Maximum inlet pressure is 1.0 MPa (145 psi); with the differential-pressure drain the regulator adjusts from 0.15-0.9 MPa (20-130 psi); the medium is compressed air and the working temperature range is -5 to 70 C (non-freezing). The filter and lubricator bowls on this 400 size are PC (polycarbonate).
This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch, and each GC set can be ordered with 40 um or 5 um filtration, differential-pressure, automatic or manual drains, MPa, psi or bar gauge scales, G (BSPP) or NPT threads in place of the PT standard, and an optional mounting bracket. Flow for this series is published as curves rather than a single rating, so contact us and we will confirm the datasheet figures for your application on request.
Airtac GC FRL Unit GC400C10F1W Technical Specifications
| Model | Airtac GC FRL Unit GC400C10F1W |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GC FRL Unit GC400C10F1W
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-C1 filter, GR400-C1 regulator and GL400-C1 lubricator.
Size Class & How It Differs From GFC
- GC200PT1/8" - PT1/4"
- GC300PT1/4" - PT1/2"
- GC400PT3/8" - PT1/2"
- GC600PT3/4" - PT1"
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · See datasheet · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-C1 |
| Build order | Filter → regulator → lubricator |
Where the Airtac GC FRL Unit GC400C10F1W Is Used
Robot assembly cell
Air preparation for the gripper and clamp circuits of a six-axis assembly robot: the 5 um element screens fine particulate before the pilot valves, the regulator holds a steady working setpoint and the lubricator feeds a light oil mist to the actuator seals.
Carton-forming line
A conditioned supply for the pusher and clamp cylinders on a carton-forming and sealing conveyor, where cleaned, regulated and lubricated air keeps stroke action consistent through a full production shift.
Laboratory automation skid
Prepared air for automated sample-handling instruments, where fine 5 um filtration, a stable regulator setpoint and a clear square MPa gauge protect sensitive pneumatic positioning stages.
Is the Airtac GC FRL Unit GC400C10F1W the Right Station?
The real choices in this code are the 400 size with PT3/8 ports (step up to 600 or down to 300 if your line porting or expected flow differs), the 5 um W element instead of the standard 40 um, and the differential-pressure drain, which handles condensate without a manual draining routine. The embedded square gauge reads in MPa; psi and bar scales, plus an external round gauge, are alternatives. PT is the standard thread, with G (BSPP) and NPT available as catalogue options, and a mounting bracket is optional. Flow in the G series is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Three-unit (GC) or two-unit (GFC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the station above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-C1 regulator with a GF400-C1 filter on that branch.
Airtac GC FRL Unit GC400C10F1W FAQ
AirTAC publishes flow for the G series as curves across operating conditions rather than one rated figure, so we do not quote a single number here. Tell us your line conditions and we will confirm the datasheet flow figures on request.
40 um is the standard grade for general plant air; the 5 um W grade fitted here traps finer particles for pilot valves, instruments and other downstream components that need cleaner air. Both grades are catalogue options on GC sets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GC FRL Unit GC400C10F1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.