Airtac GFC Combination Unit GFC200C06C1
The AirTAC Airtac GFC Combination Unit GFC200C06C1 is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
About the Airtac GFC Combination Unit GFC200C06C1
The AirTAC GFC series pairs a filter-regulator with a lubricator in a matched two-piece set, covering filtration, pressure regulation and oil-mist lubrication from one order. This GFC200C06C1 is the size 200 frame with PT1/8 (1/8 in.) ports, the standard 40 um filter element and differential-pressure drains. The C1 option fits an external round gauge on the regulator with MPa scale, so the set pressure can be read and repeated at a glance. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi) with this drain type, and the working temperature range is -5 to 70 C. The bowls on this size are polycarbonate.
This is a genuine AirTAC part. The G range runs in sizes 200, 300, 400 and 600, with 40 um or 5 um elements, differential-pressure, automatic or manual drains, embedded square or external round gauges in MPa, psi or bar scale, and PT, G (BSPP) or NPT threads. Flow is published as curves rather than one rated figure, so we confirm datasheet numbers on request.
Airtac GFC Combination Unit GFC200C06C1 Technical Specifications
| Model | Airtac GFC Combination Unit GFC200C06C1 |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC200C06C1
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC200C06C1 Is Used
Laboratory pneumatic test rigs
On a bench rig cycling test cylinders or clamps, the set cleans the bench air, holds a repeatable working pressure and meters oil mist, while the round MPa gauge lets the operator read the exact set pressure.
Small pick-and-place handling modules
Feeding a compact pick-and-place module on an assembly bench, the PT1/8 ports suit the short tubing runs of small actuators and the regulator pins the cycle pressure.
Bench-mounted air tools at repair stations
At a maintenance bench running riveters, ratchets and small drivers, the two-unit set filters the shop air to 40 um, caps the working pressure shown on the gauge and keeps oil mist in the tool line.
Is the Airtac GFC Combination Unit GFC200C06C1 the Right Set?
Size 200 with PT1/8 ports is the smallest port step of the G range (200, 300, 400 and 600) - right for short tubing runs and light actuator loads - but capacity is published as flow curves, not a single rating, so ask us to confirm sizing before ordering. Choices within the family include drain type (differential-pressure, automatic or manual; the manual-drain version widens the regulation range to 0.05-0.9 MPa / 7-130 psi), the standard 40 um element or the fine 5 um option, an embedded square gauge or the external round gauge fitted here, in MPa, psi or bar scale, and G (BSPP) or NPT threads instead of the standard PT.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC200C06C1 FAQ
AirTAC publishes G-series capacity as flow curves rather than a single rated number, so we do not state a figure here. Share your line pressure, downstream demand and allowable pressure drop, and we will confirm sizing from the datasheet on request.
C1 specifies an external round pressure gauge on the regulator with MPa scale (C2 is psi, C3 is bar). The plain code carries the embedded square gauge instead, and N deletes the gauge altogether - useful where a panel-mounted gauge already exists.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC200C06C1
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.