Airtac GFC Combination Unit GFC200C06C1W
The AirTAC Airtac GFC Combination Unit GFC200C06C1W is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
About the Airtac GFC Combination Unit GFC200C06C1W
The AirTAC GFC series pairs a filter-regulator with a lubricator in a matched two-piece set, so one order covers filtration, regulation and oil-mist lubrication. This GFC200C06C1W is the size 200 frame with PT1/8 (1/8 in.) ports, the fine 5 um filter element (the W option) and differential-pressure drains. The C1 option fits an external round gauge on the regulator with MPa scale for reading the set pressure directly. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi) with this drain type, and the working temperature range is -5 to 70 C. The bowls on this size are polycarbonate.
This is a genuine AirTAC part. The G range is offered in sizes 200, 300, 400 and 600, with 40 um or 5 um elements, differential-pressure, automatic or manual drains, embedded square or external round gauges in MPa, psi or bar scale, and PT, G (BSPP) or NPT threads. Flow is published as curves rather than a single rating, so we confirm datasheet figures on request.
Airtac GFC Combination Unit GFC200C06C1W Technical Specifications
| Model | Airtac GFC Combination Unit GFC200C06C1W |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC200C06C1W
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC200C06C1W Is Used
Spray-gun stations in paint shops
Supplying spray guns at a finishing bench, the 5 um element strips particles that would show in the coating, the regulator pins atomising pressure on the gauge and the lubricator serves the gun's trigger cylinder.
Air-motor drives on mixing stands
Feeding a vane air motor on a small mixing stand, the regulator sets motor speed and the round MPa gauge shows the setting, while the lubricator keeps the motor running in oil mist.
High-cycle press feeders on stamping presses
On a strip feeder cycling short strokes all shift, the set keeps the feeder valve's air finely filtered, holds the regulated working pressure and feeds oil mist to the drive cylinder.
Is the Airtac GFC Combination Unit GFC200C06C1W the Right Set?
Size 200 with PT1/8 ports is the smallest port step in the G range (200, 300, 400 and 600); capacity is published as flow curves, not a single rated figure, so ask us to confirm sizing against your application before ordering. The W option here specifies the 5 um element instead of the standard 40 um - the right call where finer air matters to the process. You can also choose drain type (differential-pressure, automatic or manual; manual drain widens the regulation range to 0.05-0.9 MPa / 7-130 psi), gauge type and scale (external round MPa fitted here; embedded square, psi or bar also available), and G (BSPP) or NPT threads instead of the standard PT.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC200C06C1W FAQ
AirTAC publishes G-series capacity as flow curves rather than a single rated figure, so we do not quote a number here. Give us your line pressure, downstream demand and acceptable pressure drop, and we will confirm the right size from the datasheet on request.
The W in GFC200C06C1W specifies the 5 um element; the plain code carries the standard 40 um. Choose 5 um where finer air quality matters to the process - finishing, coating and similar work - and stay with 40 um for general plant actuation where coarser protection is enough.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC200C06C1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.