Airtac GFC Combination Unit GFC200C06C1WK
The AirTAC Airtac GFC Combination Unit GFC200C06C1WK is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
About the Airtac GFC Combination Unit GFC200C06C1WK
The GFC200C06C1WK is a genuine AirTAC G-series two-unit set that pairs a filter regulator with a lubricator, so one assembly filters, regulates and lubricates the compressed air feeding your circuit. This size 200 configuration carries a PT1/8 port for compact branch lines, a 5 um element for finer filtration than the standard 40 um grade, differential-pressure drains on the PC bowls, a built-in reverse (check) valve, and an external round gauge reading pressure in MPa. Regulation range with differential-pressure drain is 0.15-0.9 MPa (20-130 psi), with a maximum inlet pressure of 1.0 MPa (145 psi) and a -5 to 70 C (non-freezing) operating range.
The G-series is offered in 200, 300, 400 and 600 sizes with ports stepping from 1/8 inch up to 1 inch, in PT (standard), G (BSPP) or NPT threads, plus choices of drain type, filter grade, gauge and reverse valve. Flow figures are published as curves rather than a single rating, so we confirm datasheet numbers on request.
Airtac GFC Combination Unit GFC200C06C1WK Technical Specifications
| Model | Airtac GFC Combination Unit GFC200C06C1WK |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC200C06C1WK
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC200C06C1WK Is Used
CNC fixture clamping circuits
Filtered, regulated and oiled air to clamping cylinders on a machining fixture, keeping the clamp pressure steady and the seals lubricated cycle after cycle.
Packaging machine actuation
Air preparation for the sealing and forming cylinders of a carton or blister packaging line, with the 5 um element protecting close-tolerance valves.
Assembly-station air tools
A wall-mounted supply point feeding impact drivers and nutrunners at a manual assembly bench, giving workers a set, lubricated working pressure.
Is the Airtac GFC Combination Unit GFC200C06C1WK the Right Set?
Start from the pipe size your machine needs: 200 is the entry size with a PT1/8 port here, and stepping to 300, 400 or 600 buys larger ports and more flow. This unit uses differential-pressure drains; choose A for automatic drain or M for manual if your installation is unattended or hard to reach. The 5 um element (W) suits finer-particle duties, while the standard 40 um grade covers general supply. The external round gauge shows MPa; psi and bar scales and the embedded square gauge are catalogue options, and PT thread is standard with G (BSPP) or NPT available to order.
Because AirTAC publishes flow only as curves, not a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC200C06C1WK FAQ
AirTAC does not publish a single rated-flow figure for the GFC series; flow data is given as curves. Send us your line pressure and demand and we will confirm the sizing from the datasheet on request.
C1 selects the external round pressure gauge with an MPa scale instead of the embedded square gauge, and W selects the optional 5 um filter element in place of the standard 40 um grade. Both are decodable choices you can order either way on any GFC set.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC200C06C1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.