Airtac GFC Combination Unit GFC200C06F1WK
The AirTAC GFC Combination Unit GFC200C06F1WK is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC200C06F1WK
GFC200C06F1WK is a genuine AirTAC G-series two-unit set: a filter regulator paired with a lubricator, conditioning compressed air in one station by filtering, regulating and then oil-mist lubricating the supply. This 200-size configuration is ported PT1/8, carries the optional fine 5 um filter element (W code) instead of the 40 um standard, drains by differential pressure, and its regulator adjusts 0.15-0.9 MPa (20-130 psi). A square pressure gauge on the MPa scale is included, and a reverse (check) valve is fitted.
This is a genuine AirTAC part. The GFC series is offered in 200, 300, 400 and 600 sizes, with a choice of drain type, 40 um standard or 5 um filtration, gauge style and scale, and G (BSPP) or NPT thread options alongside the PT standard. Max working pressure is 1.0 MPa (145 psi) and the temperature range is -5 to 70 C, non-freezing. Flow for the G series is published as curves rather than a single rating, so we confirm datasheet and sizing figures on request.
Airtac GFC Combination Unit GFC200C06F1WK Technical Specifications
| Model | Airtac GFC Combination Unit GFC200C06F1WK |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC200C06F1WK
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC200C06F1WK Is Used
Paint spray booth air prep
Conditioning the air feed to spray guns in a paint booth, where the 5 um element and a clearly visible set pressure support a consistent finish on painted parts.
Assembly bench tool supply
Feeding regulated, oil-misted air to pneumatic screwdrivers and impact drivers at a workbench assembly station so the tools receive continuous lubrication in service.
Packaging line cylinders
Filtering, regulating and lubricating air for carton-sealer and case-packer cylinders on a packaging conveyor, with the square gauge on hand for pressure checks.
Is the Airtac GFC Combination Unit GFC200C06F1WK the Right Set?
Start with size and port: 200 is the compact step, and moving up to 300, 400 or 600 buys a larger port and more flow. Drain: this set uses differential-pressure drain; automatic (A) and manual (M) versions exist, and manual changes the regulator range to 0.05-0.9 MPa (7-130 psi). Filtration: 40 um standard, 5 um with the W code fitted here. Gauge: the included square gauge reads MPa; a round external gauge and psi or bar scales are options. Thread is PT as standard, with G (BSPP) and NPT as catalogue options. Because flow is published as curves, not a single rating, send us your flow and pressure conditions and we will confirm sizing against the application before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC200C06F1WK FAQ
AirTAC publishes flow for the G series as curves rather than a single rated figure, so we do not quote a number here. Send us your flow and pressure conditions and we will confirm the datasheet curve and check the sizing for your application before you order.
The W code in the model selects the optional 5 um element in place of the 40 um standard, which suits finer air prep such as spray finishing or instrumentation. If 40 um is sufficient for your line, the plain GFC200C06 code is the equivalent standard-grade set.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC200C06F1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.