Airtac GFC Combination Unit GFC200C06MF1W
The AirTAC GFC Combination Unit GFC200C06MF1W is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC200C06MF1W
The AirTAC GFC family is a two-unit set: a filter-regulator plus a lubricator, so one connection point removes water and particulate from compressed air, holds a steady set pressure and meters oil mist to the tools and cylinders downstream. This 200-size set is ported PT1/8, carries the fine 5 um filter element (the W suffix) and a manual drain (the filter bowl is drained by hand), and reads pressure on the embedded square gauge scaled in MPa. With the manual drain the regulator adjusts 0.05-0.9 MPa (7-130 psi). Maximum inlet pressure is 1.0 MPa (145 psi) and the working range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The G series runs in 200, 300, 400 and 600 sizes, from 1/8 in to 1 in ports, with differential-pressure, automatic or manual drains, 40 um standard or 5 um fine filtration, embedded square or external round gauges in MPa, psi or bar scales, and PT, G (BSPP) or NPT threads. Flow is published as curves rather than a single rating, so we confirm the datasheet figures for this model on request.
Airtac GFC Combination Unit GFC200C06MF1W Technical Specifications
| Model | Airtac GFC Combination Unit GFC200C06MF1W |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC200C06MF1W
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC200C06MF1W Is Used
Laboratory pneumatic test bench
Conditions the air on a lab bench that actuates test fixtures: the 5 um element keeps fine debris off sensitive instrumentation and the square gauge pins the test pressure for repeatable runs.
Electronics assembly gripper array
Supplies the small grippers and vacuum ejectors on an electronics placement module, where cleaner 5 um air and metered lubrication suit compact, closely tolerance actuators.
Precision coating line applicator air
Feeds the applicator guns on a precision coating line, where the regulator holds a constant atomising pressure and the fine filtration guards the gun's air passages between cleanouts.
Is the Airtac GFC Combination Unit GFC200C06MF1W the Right Set?
Decodable choices on this family: the 200 size steps up to PT1/4 (08), PT3/8 (10) and larger ports as your air demand grows, so size the port to the supply line. Drains come as differential-pressure (standard), automatic (A) or manual (M, as here); the manual-drain regulator range is 0.05-0.9 MPa (7-130 psi). Filtration is the key choice here: this code carries the 5 um (W) element, while the version without W uses the 40 um standard element. The gauge is the embedded square type, MPa scale; an external round gauge and psi/bar scales are the alternatives, and K adds a reverse (check) valve. PT is the standard thread; G and NPT are order options.
Because flow for this series is published as curves and not as a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC200C06MF1W FAQ
AirTAC publishes G-series capacity as flow curves, not as a single rated figure, so we do not state one number here. Tell us your inlet pressure and downstream demand and we will confirm the datasheet curve for this exact model on request.
This code carries the 5 um element for finer particle removal, suited to spraying, lab work and small actuators; the same set without W uses the 40 um standard element for general plant air. Both are catalogue options and we can confirm the right pick for your tools on request.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC200C06MF1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.