Airtac GFC Combination Unit GFC200C06MF1WK
The AirTAC GFC Combination Unit GFC200C06MF1WK is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC200C06MF1WK
GFC200C06MF1WK is a two-piece AirTAC air-preparation set: a filter regulator plus a separate lubricator. The filter-regulator section removes water and particles down to 5 um and holds the downstream pressure you set (adjustable 0.05-0.9 MPa / 7-130 psi with this manual drain), while the lubricator meters oil mist into the line. The 200 size carries PT1/8 ports (PT thread as standard), a manual-drain PC (polycarbonate) bowl, an embedded square gauge reading in MPa, a fitted reverse (check) valve and a mounting bracket. Maximum working pressure is 1.0 MPa (145 psi) with a -5 to 70 C operating range.
This is a genuine AirTAC part from the G-series, which spans sizes 200 to 600 with ports from 1/8 to 1 inch and a choice of drain type, filter grade, gauge and thread. AirTAC publishes flow as curves rather than one rated number, so we confirm flow and other datasheet figures for your application on request.
Airtac GFC Combination Unit GFC200C06MF1WK Technical Specifications
| Model | Airtac GFC Combination Unit GFC200C06MF1WK |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC200C06MF1WK
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC200C06MF1WK Is Used
Pneumatic stamping press cell
Filtered, regulated and oiled air feeds the clamping and forming cylinders on a benchtop stamping press, with the check valve holding the set pressure against backflow.
Flow-wrapper packaging line
Supplies clean, lubricated air to the seal bars and product-gripping cylinders of a horizontal flow wrapper running film and cartons.
Maintenance-shop air tools
Delivers regulated, filtered and oil-misted air to impact wrenches, ratchets and die grinders on a plant maintenance bench.
Is the Airtac GFC Combination Unit GFC200C06MF1WK the Right Set?
Within the G-series you step from size 200 (PT1/8) up to 300 (PT1/4), 400 (PT3/8) and 600 to match your machine's port and air demand. Drain types are manual, automatic and differential-pressure; this unit uses manual draining, which an operator performs periodically but which keeps the pressure-adjustment range wide at 0.05-0.9 MPa (7-130 psi). The element here is the 5 um (W) grade; 40 um is the standard alternative. The embedded square gauge reads in MPa, and PT is the standard thread with G (BSPP) and NPT available as catalogue options. Because flow is published as curves rather than a single rating, send us your air demand and we will confirm sizing against the datasheet curves before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC200C06MF1WK FAQ
AirTAC publishes flow for the G-series as performance curves, not as a single rated figure, so we do not quote one number here. Tell us your operating pressure and air demand and we will confirm the flow from the datasheet on request.
The K in the code means a reverse (check) valve is fitted, so air will not flow back through the unit and the downstream set pressure is held if the supply is interrupted. Codes without K are supplied without it.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC200C06MF1WK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.