Airtac GFC Combination Unit GFC200C06MN
The AirTAC GFC Combination Unit GFC200C06MN is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC200C06MN
GFC200C06MN is a two-piece AirTAC air-preparation set: a filter regulator plus a separate lubricator. The filter-regulator section removes water and particles down to the standard 40 um grade and holds the downstream pressure you set (adjustable 0.05-0.9 MPa / 7-130 psi with this manual drain), while the lubricator meters oil mist into the line. The 200 size carries PT1/8 ports (PT thread as standard) and a manual-drain PC (polycarbonate) bowl; no gauge is supplied in this version. Maximum working pressure is 1.0 MPa (145 psi) with a -5 to 70 C operating range, and a mounting bracket is included.
This is a genuine AirTAC part from the G-series, which runs from size 200 to 600 with ports from 1/8 to 1 inch and options for drain type, filter grade, gauge, thread and bracket. AirTAC publishes flow as curves rather than one rated figure, so we confirm flow and other datasheet data for your application on request.
Airtac GFC Combination Unit GFC200C06MN Technical Specifications
| Model | Airtac GFC Combination Unit GFC200C06MN |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC200C06MN
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC200C06MN Is Used
Bottling-line cylinder supply
Feeds filtered, regulated and lubricated air to the bottle-gripping and capping-head cylinders on a rotary bottling machine.
Valve-manifold air conditioning
Conditions the supply feeding the valve manifold that drives a small pick-and-place gripper array on an assembly cell.
Workshop air-tool circuit
Supplies regulated, oiled air to impact wrenches, ratchets and grinders on a general plant maintenance bench.
Is the Airtac GFC Combination Unit GFC200C06MN the Right Set?
Size 200 with PT1/8 is the entry step of the G-series; move up to 300 (PT1/4), 400 (PT3/8) or 600 when the machine port or air demand calls for it. Draining here is manual, so an operator drains the bowl periodically; automatic and differential-pressure drains are catalogue alternatives. The element is the standard 40 um grade; choose the 5 um (W) grade when finer filtration is wanted. This code has no gauge, but gauge options with MPa, psi or bar scales can be ordered. PT is the standard thread, with G (BSPP) and NPT as orderable options. Flow is published as curves rather than a single rating, so ask us to confirm sizing against the datasheet before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC200C06MN FAQ
AirTAC publishes G-series flow as performance curves rather than a single rated number, so we cannot quote one figure here. Share your operating pressure and air demand and we will confirm the flow from the datasheet on request.
The N in the code means the unit is supplied without a gauge. Gauge options are catalogue choices on G-series regulators: an embedded square gauge or an external round gauge, each with MPa, psi or bar scales, so order the variant that suits your panel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC200C06MN
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.