Airtac GFC Combination Unit GFC200C08F1
The AirTAC GFC Combination Unit GFC200C08F1 is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC200C08F1
The AirTAC GFC200C08F1 combines a filter regulator and a lubricator in one two-piece set, giving you water and particulate removal, pressure regulation and oil-mist lubrication from a single part number. This 200-size unit has PT1/4 ports, the standard 40 um filter element, a differential-pressure drain on the filter bowl and the embedded square pressure gauge with MPa scale that comes as standard. The regulator adjusts from 0.15 to 0.9 MPa (20 to 130 psi) with this drain type, and the polycarbonate bowls suit the -5 to 70 C operating range.
This is a genuine AirTAC part from the G series, available in 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch and PT, G or NPT threads. Flow for the G series is published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for this code on request.
Airtac GFC Combination Unit GFC200C08F1 Technical Specifications
| Model | Airtac GFC Combination Unit GFC200C08F1 |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC200C08F1
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC200C08F1 Is Used
Assembly cell air tools
Feeds impact drivers and nutrunners at a light assembly bench, filtering line water, holding set pressure on the square gauge and oil-misting the tools in use.
Conveyor diverters and stoppers
Prepares air for the pop-up diverters and stop cylinders along a carton conveyor, keeping the distribution valves free of dirt and the cylinders lubricated.
Air cylinder actuation on mixers
Supplies the discharge-gate cylinders on a batching mixer, with the 40 um element and regulator protecting the solenoid valves that cycle the gates.
Is the Airtac GFC Combination Unit GFC200C08F1 the Right Set?
The 200 size with 1/4 in ports is the entry step of the G series; step up to 300, 400 or 600 if your circuit needs more air. This code keeps the standard 40 um element - add W for the finer 5 um grade if the downstream valves need it. The F1 suffix selects the embedded square gauge with MPa scale; psi or bar scales and an external round gauge are alternatives. Drain here is the default differential-pressure type, with automatic (A) or manual (M) available - a manual drain extends the regulating range to 0.05-0.9 MPa (7-130 psi). No check valve is fitted on this code; use the K suffix if you want one. Thread is PT as standard, with G (BSPP) and NPT as orderable catalogue options.
Since flow appears only as curves in the datasheet, not as one rated number, ask us to confirm sizing for your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC200C08F1 FAQ
AirTAC publishes G-series flow as characteristic curves rather than a single rated figure, so there is no one number to quote. Send us your flow demand and we will confirm the datasheet curves for this exact code on request before you commit to a size.
F1 is the embedded square pressure gauge supplied as standard with MPa scale. You can instead order a psi or bar scale, an external round gauge (the C1 code as on the GFC200C08C1WK), or no gauge at all with the N code - tell us which scale your panel reads and we will match the code.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC200C08F1
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.