Airtac GFC Combination Unit GFC200C08F1W
The AirTAC GFC Combination Unit GFC200C08F1W is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC200C08F1W
The AirTAC GFC200C08F1W is a two-unit air preparation set - filter regulator plus lubricator - fitted with the W-option 5 um filter element for finer particulate removal than the standard 40 um grade. This 200-size configuration has PT1/4 ports, a differential-pressure drain on the filter bowl and the embedded square pressure gauge with MPa scale. The regulator adjusts from 0.15 to 0.9 MPa (20 to 130 psi) with this drain type, and the polycarbonate bowls suit the -5 to 70 C operating range.
This is a genuine AirTAC part from the G series, which runs in 200, 300, 400 and 600 sizes with ports from 1/8 to 1 inch and PT, G or NPT threads. AirTAC states flow as curves rather than a single rating, so we will confirm the datasheet figures for this exact code on request.
Airtac GFC Combination Unit GFC200C08F1W Technical Specifications
| Model | Airtac GFC Combination Unit GFC200C08F1W |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC200C08F1W
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC200C08F1W Is Used
Electronics assembly pick-and-place
Feeds the vacuum ejectors and gripper cylinders on an SMT-adjacent assembly module, where the 5 um element protects the fine orifices in the ejector nozzles.
Paint booth air to spray guns
Prepares air ahead of the final point-of-use setup at a spray booth, filtering fine particles and feeding the gun at a set, gauge-monitored pressure with lubrication for the trigger valve.
Pneumatic precision torque tools
Supplies precision pneumatic screwdrivers at a bench, where clean 5 um air, stable regulated pressure and oil mist keep the clutch mechanisms consistent.
Is the Airtac GFC Combination Unit GFC200C08F1W the Right Set?
This code is the fine-filtration choice in the 200 size: the W suffix gives the 5 um element where downstream logic valves, probes or gauges need cleaner air than the standard 40 um grade. Ports are 1/4 in PT on the smallest G-series frame; move to 300, 400 or 600 for higher air demand. The F1 suffix is the embedded square gauge with MPa scale - psi or bar scales, an external round gauge or no gauge (N) are alternatives. Drain is the differential-pressure default; automatic (A) and manual (M) versions exist, and a manual drain extends the regulating range to 0.05-0.9 MPa (7-130 psi). Add K if a check valve is wanted. Thread is PT as standard, with G (BSPP) and NPT as orderable options.
Flow is published as curves, not a single rated figure, so ask us to confirm sizing against the datasheet for your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC200C08F1W FAQ
There is no single rated flow number for this set - AirTAC publishes G-series flow as characteristic curves in the datasheet. Tell us your application and we will confirm the relevant flow figures for this exact code on request, so you can check the 200 size is right before ordering.
Choose W when the downstream equipment - precision valves, ejectors, gauges or instruments - needs finer particulate removal than the standard grade provides. The trade-off is that the 5 um element is the optional grade, so it must be ordered explicitly; the standard 40 um version of the same set is GFC200C08F1.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC200C08F1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.