Airtac GFC Combination Unit GFC200C08MC1K
The AirTAC GFC Combination Unit GFC200C08MC1K is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC200C08MC1K
The AirTAC GFC series combines a filter-regulator and a separate lubricator in one two-unit set, so filtration, pressure regulation and oil-mist lubrication arrive as one purchase. This 200-size set is ported PT1/4 (PT thread, 1/4 in.). Its manual drain (M) empties the bowl by hand at check rounds, the standard 40 um element removes water and particulate, and the C1 gauge is the external round type reading in MPa. The K code adds a built-in check valve that holds downstream pressure when the supply side is interrupted. Maximum working pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi) on this manual-drain version, and the set is rated for -5 to 70 C. Bowls on the 200 size are polycarbonate.
This is a genuine AirTAC part. The G series spans 200, 300, 400 and 600 sizes with ports from 1/8 to 1 in., and is configurable with automatic, manual or differential-pressure drains, 40 or 5 um elements, round or square gauges in MPa, psi or bar scales, the reverse-valve option, and G (BSPP) or NPT threads besides the PT standard. Flow is published as curves rather than a single rated figure, so we confirm datasheet figures for your application on request.
Airtac GFC Combination Unit GFC200C08MC1K Technical Specifications
| Model | Airtac GFC Combination Unit GFC200C08MC1K |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC200C08MC1K
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC200C08MC1K Is Used
Palletizer clamp circuit
Supply clamp and hold-down cylinders on a palletizer; the check valve keeps clamps holding if plant air dips between cycles.
Trailer assembly air tools
Feed impact wrenches and air drills at a trailer assembly station with regulated, lubricated air; the check valve rides through brief supply interruptions.
Laboratory test-bench fixtures
Condition the compressed-air bench in a test laboratory where pneumatic fixtures need particulate-free, pressure-stable, lightly oiled air for repeatable test setups.
Is the Airtac GFC Combination Unit GFC200C08MC1K the Right Set?
Start from the 200 size and its 1/4 in. port for compact circuits; move to 300, 400 or 600 as port size and flow needs grow. The manual drain (M) here suits points emptied during routine checks, with automatic (A) and differential-pressure drains available as alternatives. The element is the standard 40 um grade (W gives 5 um), and the K code fits the check valve that holds downstream pressure on supply loss. The gauge is the external round type on an MPa scale, with psi (2) and bar (3) options. Thread is PT as standard; G (BSPP) and NPT are order options. AirTAC publishes flow as curves, not a single rating, so ask us to confirm sizing before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC200C08MC1K FAQ
There is no single rated flow figure we can quote: AirTAC publishes flow for the G series as curves, so any one number would be a guess. Share your application and we will confirm the sizing from the datasheet on request before you order.
The K code fits a reverse (check) valve in the set, which holds downstream pressure when the upstream supply is cut or drops out. That is useful for clamp and hold circuits and for tools that must not lose their regulated set-point mid-cycle. The same set without the K is GFC200C08MC1.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC200C08MC1K
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.