Airtac GFC Combination Unit GFC200C08MF1
The AirTAC GFC Combination Unit GFC200C08MF1 is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC200C08MF1
GFC200C08MF1 is a genuine AirTAC G-series two-unit F.R.L. set: a filter regulator plus a lubricator as one pair. The filter regulator removes water and particulate with the standard 40um element and regulates downstream pressure over 0.05-0.9 MPa (7-130 psi, manual-drain range), while the lubricator adds oil mist for downstream tools and actuators. This configuration is size 200 with a PT1/4 port, manual-drain polycarbonate bowls, and an embedded square pressure gauge reading in MPa. Max working pressure is 1.0 MPa (145 psi); operating temperature is -5 to 70 C.
This is a genuine AirTAC part. The G-series range runs from size 200 to 600 with ports from 1/8 to 1 inch, and options including automatic, manual or differential-pressure drains, 40um or 5um filter elements, square or round gauges with MPa, psi or bar scales, G (BSPP) and NPT threads, and a reverse-flow valve. Flow is published as curves rather than a single rating, so we confirm flow and full datasheet figures on request.
Airtac GFC Combination Unit GFC200C08MF1 Technical Specifications
| Model | Airtac GFC Combination Unit GFC200C08MF1 |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC200C08MF1
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC200C08MF1 Is Used
Bottling conveyor gating
Supplies filtered, regulated, lubricated air to the pusher and stopper cylinders that gate bottles along a filling line, with the manual drain bled at each sanitation shift.
Machine valve manifold supply
Conditions the air feeding a directional-valve stack on a machine tool or special-purpose machine, keeping water and swarf out of the valves while metering oil mist to the actuators.
Fixture clamp circuits
A dedicated conditioning set for swing clamps and work-support cylinders on a machining fixture, where the regulator holds clamp pressure and the lubricator protects the cylinders.
Is the Airtac GFC Combination Unit GFC200C08MF1 the Right Set?
Choose the size (200/300/400/600) for the port and flow your circuit needs; 200 with a 1/4 inch port fits compact point-of-use installations. Drain type is a real decision: the manual drain here suits attended equipment, while automatic or differential-pressure drains suit unattended runs. This version carries the standard 40um element; add W to the code for the finer 5um grade. The embedded square gauge reads MPa; round gauges and psi or bar scales are order options. G (BSPP) or NPT threads can be ordered instead of the standard PT. Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC200C08MF1 FAQ
AirTAC publishes G-series flow as characteristic curves rather than one rated number, so we do not state a rated flow here. Tell us your application and we will confirm the flow from the datasheet on request.
A manual drain means an operator opens the bowl drain on a routine, which is simple and reliable for attended machines. For unattended lines, order the automatic or differential-pressure drain variant of the same GFC200 set instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC200C08MF1
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.