Airtac GFC Combination Unit GFC200C08MF1K
The AirTAC GFC Combination Unit GFC200C08MF1K is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC200C08MF1K
GFC200C08MF1K is a genuine AirTAC G-series two-unit F.R.L. set combining a filter regulator and a lubricator, with a reverse (check) valve fitted. The filter regulator removes water and particulate with the standard 40um element and regulates downstream pressure over 0.05-0.9 MPa (7-130 psi, manual-drain range); the lubricator meters oil mist to downstream tools and cylinders. This configuration is size 200 with a PT1/4 port, a manual-drain bowl, and an embedded square gauge reading in MPa. Max working pressure is 1.0 MPa (145 psi); operating temperature is -5 to 70 C.
This is a genuine AirTAC part. The G-series runs from size 200 to 600 with ports from 1/8 to 1 inch, and options including the three drain types, 40um or 5um elements, square or round gauges with MPa, psi or bar scales, G (BSPP) and NPT threads, and the reverse-flow valve. Flow is published as curves, not a single rating, so we confirm flow and full datasheet figures on request.
Airtac GFC Combination Unit GFC200C08MF1K Technical Specifications
| Model | Airtac GFC Combination Unit GFC200C08MF1K |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC200C08MF1K
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC200C08MF1K Is Used
Palletizer gripper supply
Conditions air to the vacuum and clamp grippers on a palletizing cell, with the regulator holding pick pressure and the lubricator protecting the gripper cylinders.
Can-line end coder
Feeds the printing head and eject cylinders on a can-ending line, where filtered, regulated, oil-misted air keeps the coder cycling through each shift.
Shop air-tool drop
A wall-mounted drop at a workshop bench giving filtered, pressure-set and lubricated air to impact wrenches, grinders and air ratchets.
Is the Airtac GFC Combination Unit GFC200C08MF1K the Right Set?
Size 200 with a 1/4 inch PT port suits compact point-of-use conditioning; move to 300, 400 or 600 for larger ports and higher air demand. The manual drain suits attended equipment; automatic or differential-pressure drains are available for unattended runs. This version uses the standard 40um element (add W for 5um) and the K option fits the reverse-flow valve. The embedded square gauge reads MPa, with round gauges and psi or bar scales as order options, and G (BSPP) or NPT threads can be ordered instead of the standard PT. Since flow is published only as curves, ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC200C08MF1K FAQ
Yes. AirTAC publishes G-series flow as characteristic curves rather than a single rated figure, so there is no rated-flow number to quote here. Send us your application details and we will confirm the flow from the datasheet on request.
Yes. PT is the standard thread on this set, and G (BSPP) and NPT versions are catalogue options you can order. Specify the thread you need when ordering and we will confirm the matching model code.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC200C08MF1K
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.