Airtac GFC Combination Unit GFC200C08MF1W
The AirTAC GFC Combination Unit GFC200C08MF1W is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC200C08MF1W
GFC200C08MF1W is a genuine AirTAC G-series two-unit F.R.L. set: a filter regulator plus a lubricator as one pair. The W in the code selects the finer 5um filter element in place of the standard 40um, so the regulator section removes water and finer particulate and holds downstream pressure over 0.05-0.9 MPa (7-130 psi, manual-drain range), while the lubricator meters oil mist to downstream equipment. This configuration is size 200 with a PT1/4 port, a manual-drain bowl, and an embedded square gauge reading in MPa. Max working pressure is 1.0 MPa (145 psi); operating temperature is -5 to 70 C.
This is a genuine AirTAC part. The G-series range runs from size 200 to 600 with ports from 1/8 to 1 inch, and options including automatic, manual or differential-pressure drains, 40um or 5um elements, square or round gauges with MPa, psi or bar scales, G (BSPP) and NPT threads, and a reverse-flow valve. Flow is published as curves rather than a single rating, so we confirm flow and full datasheet figures on request.
Airtac GFC Combination Unit GFC200C08MF1W Technical Specifications
| Model | Airtac GFC Combination Unit GFC200C08MF1W |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC200C08MF1W
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC200C08MF1W Is Used
Precision jig clamping
Conditions air for the clamps and locators on a precision machining jig, where the 5um element keeps fine contamination out of the small control valves.
Lab automation actuators
Supplies cleaned, regulated, lubricated air to the cylinders and pick-and-place actuators on laboratory automation equipment, with the manual drain emptied during scheduled maintenance.
Carton erector station
Feeds the vacuum generators and flap-fold cylinders of a carton erector on a packaging line, keeping water and fine particles away from the ejector valves.
Is the Airtac GFC Combination Unit GFC200C08MF1W the Right Set?
Pick the size (200/300/400/600) for your port and air demand; this 200 set with a 1/4 inch PT port suits compact point-of-use conditioning. The manual drain is right for attended equipment, with automatic or differential-pressure drains offered for unattended runs. The key choice in this code is filtration: the 5um (W) element gives finer particle removal than the standard 40um - use it where downstream valves or instruments are sensitive, and accept that finer elements load faster so drain checks matter. Gauge style and scale, thread (PT standard, G or NPT to order), and the K reverse-flow valve are all selectable. Flow is published as curves, not a single rating, so ask us to confirm sizing before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC200C08MF1W FAQ
AirTAC publishes flow for the G-series as characteristic curves, not as a single rated figure, so no rated flow is stated here. Share your application and we will confirm the flow from the datasheet on request.
The 40um element is the standard grade for general actuation and tool circuits. The 5um W grade suits circuits with sensitive valves, instruments or smaller orifices. Same GFC200 set either way - just add or drop the W in the code.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC200C08MF1W
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.