Airtac GFC Combination Unit GFC200C08N
The AirTAC GFC Combination Unit GFC200C08N is a genuine G-series two-unit air-preparation set: a filter regulator that filters and regulates in one body, coupled to a lubricator. Two bodies do the work of three, with See datasheet ports, a 40 µm element, a differential-pressure drain and regulation over 0.15 - 0.9 MPa (20 - 130 psi).
- TypeTwo-unit set (F.R. + L.)
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFC Combination Unit GFC200C08N
The AirTAC GFC series pairs a filter-regulator with a lubricator as a two-piece preparation set, giving one conditioning point that filters, regulates and lubricates the compressed air supply. This GFC200C08N is the size 200 frame with 1/4 inch PT ports, the default differential-pressure drain, the standard 40 um element, and it is ordered without a gauge.
This is a genuine AirTAC part. Maximum working pressure is 1.0 MPa (145 psi), the temperature range is -5 to 70 C, and the bowls on the size 200 frame are polycarbonate. With the differential-pressure drain, the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi). The same series is available in sizes 200 to 600 with ports from 1/8 to 1 inch, optional 5 um elements, gauge and thread variants; flow figures are published as curves, so we confirm the datasheet on request.
Airtac GFC Combination Unit GFC200C08N Technical Specifications
| Model | Airtac GFC Combination Unit GFC200C08N |
|---|---|
| Series | GFC200 two-unit set |
| Composition | Filter regulator + lubricator (2 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The set has no separate bracket code — the two units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFC Combination Unit GFC200C08N
| GFC200 | G-series two-unit set, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination set. Constituent units, orderable separately as spares: GFR200-C0 filter regulator and GL200-C0 lubricator.
Size Class & How It Differs From GC
- GFC200PT1/8" - PT1/4"
- GFC300PT1/4" - PT1/2"
- GFC400PT3/8" - PT1/2"
- GFC600PT3/4" - PT1"
A GFC is two units because filtering and regulating share one body. A GC is three separate units — filter, regulator and lubricator. Both filter, regulate and lubricate; the GFC is the shorter assembly, the GC keeps the filter and regulator serviceable as separate bodies.
| This model | GFC200 · See datasheet · 40 µm |
|---|---|
| One size up | GFC300 |
| Three-unit equivalent | GC200-C0 |
| Build order | Filter regulator first, lubricator last |
Where the Airtac GFC Combination Unit GFC200C08N Is Used
Pick-and-place gripper supply
Assembly cell pick-and-place modules with pneumatic grippers need dry, regulated, lightly oiled air at a stable setting; this set conditions the drop feeding the end-of-arm circuit.
Bottling line actuators
Filler and capper stations use short-stroke cylinders and air knives around bottled product; the set at each machine inlet removes water and particulate while the lubricator mists the actuators.
Laboratory automation actuators
Bench-top lab automation with pneumatic lift and clamp movements benefits from a compact conditioning point; the size 200 frame and 1/4 inch ports suit tight under-bench installations.
Is the Airtac GFC Combination Unit GFC200C08N the Right Set?
Choose size 200 with the 1/4 inch port for individual machines and drop legs, moving to 300, 400 or 600 as demand grows. The differential-pressure drain is the catalogue default and needs no drain plumbing; switch to automatic or manual drain if the duty calls for it. The 40 um element is the standard grade for general plant air, with 5 um as the finer option. Gauge, scale (MPa/psi/bar), check valve and G or NPT threads are orderable variants, as is leaving the gauge off as coded here.
Flow is published as curves rather than one rated figure, so share your air demand with us and we will confirm sizing against the datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Two-unit (GFC) or three-unit (GC) layout
- ✓ Oil mist acceptable downstream
Installation & Maintenance Notes
- check Install with the airflow arrow: filter regulator first, lubricator last.
- check Mount vertically, bowls down.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills; check the oil level.
- check Keep the set above freezing (-5 to +70 °C, unfreeze).
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream, so if any branch must stay oil-free, take that branch off before the lubricator or use a GFR200-C0 filter regulator on its own.
Airtac GFC Combination Unit GFC200C08N FAQ
AirTAC publishes GFC flow as curves across pressure and port size, not as a single rated number, so no figure is stated here. Send us your consumption and working pressure and we will confirm the right size from the datasheet on request.
N selects the no-gauge variant: the regulator works exactly the same but no pressure gauge is fitted. If you want to read downstream pressure at the set, order a version with the embedded square gauge or an external round gauge in MPa, psi or bar scale instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GFC Combination Unit GFC200C08N
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.